This is a minimalistic low-mem-UI which means that I tried to reach as much as possible with as little as possible.
---------------
--[Config]--
---------------
All the Addons except MSBT only have Lua-config so you won't be able to change anything ingame. But if you got a decent Editor (like Notepad++ for example), some time and the will to understand it you will be able to configure the Addons on your own.
And you can also look things up at wowwiki or just post a comment and ask. To have MSBT and Filger working correctly and to have the "right" overall settings please follow the instuctions given in the !Readme.txt especially concerning those on the WTF-Folder.
I just Added Filger, which tracks your cooldowns/spells/buffs/debuffs on yourself or your target. But it still needs to be configured for Paladins, Priests, Shamans, Warlocks and Warriors. Configuration is explained in the Lua-File, just have a look at the other classes, it's quiet self-explaining.
Everything that has something to do with color is in Classcolor.
The informaton in the lower-left corner are made by Lynstats, the Coords (under the minimap) are Lynlocation.
You might also want to change the UF's color which is located in oUF_Uz.
The Actionbuttons you can see at the bottom are buttons from the Main-Menu-Bar. In the screen I only use 6 of them but there are another 6 right above.
To use all the other Actionbars you can enable them in the Blizz-Menu instead. the lower-left Actionbar is left to the "MainBar", lower-right is right to it. The Actionbars on the right side are at their default position.
To set shortcuts to the buttons use the Blizz-Menu. If you want the bars not to fade out type '/dis UzCombatFader'. To make them fade again type '/en UzCombatFader'. With this method you can dis-/enable any Addon you want btw.
To show the Minimap you will need to click on it (or the place it is supposed to be, somewhere in the lower-right corner). Same to hide it again.
Party and Raid:
Party frames have the same width as player and target and are located under the target (unter the ToT).
Raid-group 1 starts under the lower-left corner of the player, leaving enough space for your cooldowns. "Group-count" starts on the left and goes to the right, so group one is on the very left below the player and group 8 will be somewhere below and right of the target (Grid-like alignment).
--------------
--[Bugs]--
--------------
You will have to leavemultisamplingin your Graphics-Settings switched off. It smoothens all the borders in game which would make it impossible to draw 1px-lines.
Bug-Reports are highly appreciated as I'm not really able to do some testing. Screenshots and (if there are any) error-messages help me a lot to fix bugs!
I think I now really quit playing WoW so there won't be any further developments from me. Maybe a few bugfixes but no real changes. I still leave it free for all so you may change whatever you like, would just be nice to remind me somewhere if you do so. I will still try to help as far as I'm able to, just contact me.
If you have any suggestions/questions/whatever just go ahead and leave a comment//write a PM//post in my thread//contact me at ICQ (289227916) or IRC (#wow-interface @ irc.phcnet.de or #buffed-ui @ irc.quakenet.org).
Butsu..................................-> Skinns the loot-frame
Fane ...................................-> Skinns the chat-tabs
Filger...................................-> CD/De-/Buff Tracker
IHasNoScope.......................-> useful stuff like /rl, /en [Addons], /dis [Addon], Error-Frame, Chat-Font
iiLinks.................................-> Itemlinks in the chat [Loltitem] -> Lolitem
LynLocation.........................-> Zone-text and coords
LynStats.............................-> shows lag, fps, time, bagspace, money, mail
MikScrollingBattleText..........-> SCT-alike
oCD....................................-> Cooldowns in icons
oGlow..................................-> Item's icons get a "glow" (Epic -> purple glow)
oUF.....................................-> Unitframes
oUF_Uz...............................-> Layout for the unitframes
rActionBarStyler...................-> Places the Actionbars/-Buttons
rActionButtonStyler...............-> Skinns the ActionButtons
rBuff....................................-> Skinns/Places the Buffs
RedRange............................-> Colors ActionButtons red, if the target is out of range
Runica.................................-> Skinns/Places Runes for DKs
sThreatMeter2......................-> Threatmeter
tekJunkSeller........................-> Automatically sells grey stuff
Textures..............................-> Some textures I use. No Addon, just Data
UzChat................................-> text-formatting in the chat
UzCombatFader ...................-> Fades certain frames in/out, whenever you go iC/ooC
UzMinimap...........................-> Skinns/Places the Minimap
UzNameplates.....................-> Skinns nameplates
Change Log - Uzgarel-Mini-UI
1.0 (23.01.09)
- Release!
-> Hello world!
1.1 (28.01.09)
- UzCombatFader (removed the fader from oUF/rBars and made a new (improved) Addon for that stuff)
- rBars "removed"/updated (Replaced by rActionBar/ButtonStyler, RedRange)
-> You can switch on all optional Blizz-Bars now (I also put them on some nice places)
- sThreadMeter adjusted
1.2 (01.02.09)
- changed the UFs
-> Health-Bar now in Classcolor
-> Flipped everything vertically (Player <-> Target)
-fixed some bugs with the additional Actionbars
-> put them to the right place
-> added the lower ones to the CombatFader
1.3 (01.02.09)
- I built in a few Bugs while changing to 1.2, fixed (most of) them now.
1.4 (01.02.09)
- Finally I think I fixed everything that was not working properly. Thanks a lot to Bloodysoul for being my beta-tester
1.5 (06.02.09)
- Fixed some bugs again... will this ever be finished?
Thanks for all your reports
1.6 (05.03.09)
-Added sFilter2 for tracking buffs/debuffs.
20 (19.04.09)
-Complete renewing.
->Just wanted to keep it running for 3.1 but I felt like making it different.
Optional Files - Uzgarel-Mini-UI
Sorry, there are currently no optional files available.
Originally posted by shunsui Das ist ein bisschen problematisch, wg. meines Monitors. Das ist ein 19" Widescreen mit nativ 1440x900. Der Screenshot den ich geposted habe, habe ich im Fenstermodus gemacht. Das Problem mit der Schrift zieht sich aber durch alle Auflösungen. Hm ... ich werde mal ein wenig mit den Schriftgrößen basteln. Danke schon mal für den Tipp.
Ich bin mir jetzt nicht so 100%ig sicher, aber Du kannst ja mal versuchen, mit 1440x900 auf fullscreen zu stellen. Mit ein bisschen Glück habe ich beim Positionieren drauf geachtet und alles nur relativ ausgerichtet... könnte also auch mit deiner Auflösung gehen, probiers einfach aus.
Das ist ein bisschen problematisch, wg. meines Monitors. Das ist ein 19" Widescreen mit nativ 1440x900. Der Screenshot den ich geposted habe, habe ich im Fenstermodus gemacht. Das Problem mit der Schrift zieht sich aber durch alle Auflösungen. Hm ... ich werde mal ein wenig mit den Schriftgrößen basteln. Danke schon mal für den Tipp.
Vielen Dank für das tolle Interface. Leider sieht es bei mir nicht so ganz aus, wie es aussehen sollte.
Um jegliche Fehlkonfiguration meinerseits auszuschließen bin ich den 'geraden' Weg gegangen: Interface - Fonts - WTF von mir rausschmeißen, dein Interface in den Ordner schieben und erst einmal alles so übernehmen (inkl. natürlich des Anpassens der Ordner in WTF). Dabei kriege ich immer folgendes heraus - man beachte die Fonts:
Kannst du mir dabei irgendwie helfen? Vielen Dank! =)
mmh.. sieht ja schon ein wenig merkwürdig aus... hast Du die richtige Auflösung für deinen Monitor eingestellt? guck sonst mal in die Lua-Dateien von Lynstats und LynLocation und versuch, die Fontsize zu verändern... wenn das aber überall so ist, müsstest Du das dann auch noch in der layout.lua in oUF_Lyn ändern... für den Chat in IHasNoScope bzw. evtl auch in der \WTF\Account\CAPS-ACCNAME\Server\Charname\Chat-Chache.txt, da aber nur, wenn Du WoW vorher ausgemacht hast, sonst wird das sofort wieder überschrieben...
Aber ich vermute mal, dass das an der Auflösung liegt :P
Vielen Dank für das tolle Interface. Leider sieht es bei mir nicht so ganz aus, wie es aussehen sollte.
Um jegliche Fehlkonfiguration meinerseits auszuschließen bin ich den 'geraden' Weg gegangen: Interface - Fonts - WTF von mir rausschmeißen, dein Interface in den Ordner schieben und erst einmal alles so übernehmen (inkl. natürlich des Anpassens der Ordner in WTF). Dabei kriege ich immer folgendes heraus - man beachte die Fonts:
Originally posted by Uzgarel Thank you guys very much for the feedback
Minimap is a few pixels above the zone-Text it is de-/activated on click which means you just have to click where the minimap should be even if it isn't visible. To deactivate it again, just click it again.
You have to set multisampling to 1x in the graphics menu. Multisampling is smoothing everything in the wow-graphics and unfortuanately it also smoothens the UI to which makes it impossible to draw 1px-lines.#
The tooltip is in fact not "made" by an addon I just replaced the .blp file. Have a look at the /Interface/Tooltips-Directory. Same with the Nameplates.
Thanks big into the account of the tooltip and mini map.
How to include a map I has understood after a writing here messages.
Concerning the different sizes of strips: At me the given options of a drawing are just established.
As by the way were the thickness of a border from the different parties at mini map is changed. But I have corrected it having edited in this file ...\Interface\Addons\SEP\panels.lua - http://www.pastey.net/106924
I will try to solve now a problem with thickness of borders of the player and the bottom panel, I will write my results a bit later.
P.S.: Your assemblage of updatings has very much inspired me and it was pleasant.
my oCD Version is quite old, might be from 2.4 or something like this. I always did it the "never touch a running system"-way so I never touched oCD as it's still working
Minimap is a few pixels above the zone-Text it is de-/activated on click which means you just have to click where the minimap should be even if it isn't visible. To deactivate it again, just click it again.
You have to set multisampling to 1x in the graphics menu. Multisampling is smoothing everything in the wow-graphics and unfortuanately it also smoothens the UI, too, which makes it impossible to draw 1px-lines.
The tooltip is in fact not "made" by an addon I just replaced the .blp file. Have a look at the /Interface/Tooltips-Directory. Same with the Nameplates.
Hello, at once excuse for my English language as I from Russia and not so well know English.
I very much liked your interface. Also there were some questions on it:
1 - I for some reason do not have mini-map how to make so, what it would appear?
2 - I do not use interface reduction and in this connection probably occurs little changes of a thickness of strips about the player how it is possible to correct it? The picture - http://www.hdimage.org/viewer.php?fi...2409043420.jpg
3 - What addition is responsible for the tooltip and whether probably to change in it a font size and occurrence on a key shift (for example)?
I'll be the first to tell you "quite a nice thing"!
I respect your addiction to lua-coding and share it. Love to see compilations taking less then 1 MB of RAM.
One question: what version of oCD did you use? I've taken a look at your code and at the code of the original oCD from Haste's repositionary. They're quite different. I just want to use oCD myself but would like to start with something like "less personalized" version, but I can't get the original oCD working.
You have just downloaded by the author . If you like this AddOn why not consider supporting the author? This author has set up a donation account. Donations ensure that authors can continue to develop useful tools for everyone.
*Clicking the donate button above will take you to PayPal.com
*Clicking the donate button above will take you to Pledgie.com
Das ist ein 19" Widescreen mit nativ 1440x900. Der Screenshot den ich geposted habe, habe ich im Fenstermodus gemacht. Das Problem mit der Schrift zieht sich aber durch alle Auflösungen. Hm ... ich werde mal ein wenig mit den Schriftgrößen basteln. Danke schon mal für den Tipp. 
