Quantcast
Download
(573 Kb)
Download
Updated: 01-19-18 05:51 AM
Pictures
File Info
Compatibility:
Shadows of Argus (7.3.0)
Updated:01-19-18 05:51 AM
Created:05-17-09 12:55 PM
Downloads:392,550
Favorites:1,218
MD5:
7.3.0

Shadowed Unit Frames  Popular! (More than 5000 hits)

Version: v4.1.21
by: Shadowed, Nevcairiel

SUF focuses on a simple configuration while maintaining the flexibility that most users will care about, preventing unnecessary bloating of the addon that sacrifices performance. While you aren't going to be able to set the health bar to be exactly 3.14 pixels outside of the unit frames, you can change options you actually care about such as bar height, ordering, frame height and so on. To speed up configuration, you can configure multiple units at the same time through the global configuration. For example, if you want to set the height of the Player, Target, Focus and Party frames to 50 then the height of Target's Target, Target's Target of Target, Focus Target to 30 you can easily do this by changing two options instead of having to do it seven times.

However, should you need a little bit of extra configuration do not despair! An advanced option is included that will unlock additional configuration giving finer control over the configuration.

Slash commands: /shadoweduf (/suf)

Donations
Donations are not required, but are appreciated!



Anchoring
Are you driven crazy by your party frames not aligning up exactly with your player frames, even if it's only half a pixel off? The anchoring system will let you solve all alignment issues, by allowing you to anchor a frame to another and set a simple offset from the frame it is anchored to, or by manually setting the X/Y position of the frame.

Using the screen shot as an example, if you drag the player frame the other frames will move with the player frame preserving the alignment and spacing. Each frame can still be manually positioned wherever you want, but this gives you a way of easily anchoring and moving frames around without having to use a ruler.

Zone configuration (Disabling options/units by zone type)
Units and modules can be enabled or disabled based on the type of zone you are in. For example, if you want to see party targets and party pets while you are in an arena but nowhere else then you can use the visibility options to enable it only while inside an arena. Modules can also be disabled by zone type, if you want to see party auras while in a raid instance but nowhere else you can disable the module in raid instances only.

Profiles do not have to be swapped and it is all automatic.

Units
Supports unit frames are as follows:

Player: Player, Pet, Pet Target
General: Target, Target of Target, Target of Target of Target, Focus, Focus Target
Party: Party, Party Pets, Party Targets, Party ToT
Raid: Raid, Raid Pet, Main Tank, Main Tank Target, Main Assist, Main Assist Target, Boss, Boss Target, Boss ToT, Main Assist ToT, Main Tank ToT
Arena: Arena, Arena Target, Arena Pets, Arena ToT
Battleground: Battleground, Battleground Target, Battleground Target

Features

  • Tags: Includes a simple tagging system that can be customized in virtually any way using Lua, even if something isn't included by default odds are you can make the tags
  • Incoming Heals: Supports the Blizzard Events for incoming heal data, no external libraries needed
  • Auras: Can be set to only show auras you casted, or can cast on others. Can enlarge auras that you casted, and hide the cooldown ring on the timers of auras you didn't cast as well to make it more obvious which ones you casted and which ones you didn't
  • Aura Timers: You will need a mod such as OmniCC to show timers on buffs and debuffs
  • Aura Indicators: Display colored squares or icons for certain auras on any unit
  • Fader: Fades frames when out of combat and inactive (100% mana/no target)
  • Class Power (Eclipse, Holy Power, etc): Supports all of the class power features from Eclipse to Burning Embers.
  • Highlighting: Border highlighting of frames based on mousing over them, curable debuffs, aggro or you are targeting/focusing them
  • Range Checking: Fades frames out that are out of range of you
  • Exportable Layouts: If you have a layout, or your friend has a layout you want to try out you can export/import SUF layouts by going to /suf -> Layout Manager
  • Profiles: You can change from any profile to another one without reloading your UI, should you want to use a completely different layout based on zone you can easily switch profiles without hassle

Pretty much all the general unit frame settings are in, health bars, cast bars, power bars, portraits, indicators and so on.

Modules
Basic module support is included, should you be interested in building a module see the documentation on github for more information.

Currently released:

Updated for 7.3.5
Optional Files (3)
File Name
Version
Size
Author
Date
Type
v2.3.4
16kB
12-16-13 11:38 PM
v1.2.1
12kB
08-27-12 10:53 AM
r20110919
5kB
09-19-11 09:22 PM


Archived Files (100)
File Name
Version
Size
Author
Date
v4.1.19
572kB
Shadowed
07-12-17 02:19 AM
v4.1.17
570kB
Shadowed
03-29-17 08:17 AM
v4.1.15
571kB
Shadowed
03-29-17 01:29 AM
v4.1.10
638kB
Shadowed
09-13-16 07:54 AM
v4.1.8
631kB
Shadowed
08-28-16 07:17 AM
v4.1.6
630kB
Shadowed
08-14-16 02:30 AM
v4.1.5
630kB
Shadowed
08-13-16 03:39 AM
v4.1.4
629kB
Shadowed
08-09-16 04:49 AM
v4.1.2
631kB
Shadowed
07-21-16 04:35 PM
v4.1.1
627kB
Shadowed
07-19-16 12:18 PM
v4.0.10
632kB
Shadowed
08-09-15 01:00 PM
v4.0.9
614kB
Shadowed
01-09-15 07:03 PM
v4.0.8
616kB
Shadowed
12-14-14 02:57 PM
v4.0.7
616kB
Shadowed
11-12-14 08:37 PM
v4.0.6
617kB
Shadowed
11-01-14 04:10 PM
v4.0.5
618kB
Shadowed
10-17-14 10:24 AM
v4.0.4
618kB
Shadowed
10-15-14 11:19 PM
v4.0.3
739kB
Shadowed
10-15-14 10:24 AM
v4.0.2
618kB
Shadowed
10-12-14 10:57 PM
v4.0.1
612kB
Shadowed
06-12-14 06:40 PM
v4.0.0
609kB
Shadowed
06-05-14 07:44 PM
v3.10.7
599kB
Shadowed
04-16-14 07:32 PM
v3.10.6
600kB
Shadowed
02-22-14 08:19 PM
v3.10.5
600kB
Shadowed
02-22-14 10:29 AM
v3.10.4
600kB
Shadowed
02-17-14 05:01 PM
v3.10.3
598kB
Shadowed
01-05-14 12:02 AM
v3.10.2
598kB
Shadowed
12-19-13 08:44 PM
v3.10.1
594kB
Shadowed
12-08-13 08:10 PM
v3.10.0
595kB
Shadowed
12-08-13 05:21 PM
v3.9.1
581kB
Shadowed
11-29-13 06:01 PM
v3.9.0
581kB
Shadowed
11-18-13 07:57 PM
v3.8.10
577kB
Shadowed
09-10-13 09:45 AM
v3.8.9
514kB
Shadowed
05-21-13 07:53 AM
v3.8.7
576kB
Shadowed
04-28-13 11:43 AM
v3.8.6b
576kB
Shadowed
03-28-13 09:36 AM
v3.8.6
575kB
Shadowed
03-13-13 08:14 AM
v3.8.4
575kB
Shadowed
03-11-13 11:57 AM
v3.8.3
574kB
Shadowed
03-09-13 03:40 PM
v3.8.2
573kB
Shadowed
03-06-13 11:18 AM
v3.8.1
573kB
Shadowed
03-05-13 06:56 PM
v3.8.0
573kB
Shadowed
03-04-13 10:29 PM
v3.7.4
570kB
Shadowed
12-03-12 11:24 PM
v3.7.3
570kB
Shadowed
11-27-12 07:14 PM
v3.7.2
571kB
Shadowed
11-18-12 06:21 PM
v3.7.1
570kB
Shadowed
10-09-12 08:12 PM
v3.7
570kB
Shadowed
10-06-12 03:16 PM
v3.6.1
569kB
Shadowed
09-28-12 08:46 PM
v3.6
568kB
Shadowed
09-26-12 09:50 AM
v3.5.10
567kB
Shadowed
09-21-12 12:38 AM
v3.5.8
566kB
Shadowed
09-17-12 10:42 AM
v3.5.7
565kB
Shadowed
09-10-12 01:39 PM
v3.5.4
565kB
Shadowed
09-10-12 10:04 AM
v3.5.3
563kB
Shadowed
08-31-12 10:14 AM
v3.5.2
564kB
Shadowed
08-31-12 09:45 AM
v3.5.1
563kB
Shadowed
08-28-12 09:43 AM
v3.5
565kB
Shadowed
08-27-12 10:49 AM
v3.4.4
548kB
Shadowed
12-02-11 10:22 AM
v3.4.3
546kB
Shadowed
11-29-11 10:52 AM
v3.4.2
547kB
Shadowed
11-02-11 10:03 AM
v3.4.1
542kB
Shadowed
09-28-11 10:09 PM
v3.4.0
542kB
Shadowed
09-25-11 06:42 PM
v3.3.6
560kB
Shadowed
06-28-11 05:16 PM
v3.3.5
540kB
Shadowed
05-01-11 05:36 AM
v3.3.2
535kB
Shadowed
11-16-10 12:29 PM
v3.3.1
529kB
Shadowed
10-25-10 11:50 AM
v3.3
528kB
Shadowed
10-18-10 11:14 AM
v3.2.12
485kB
Shadowed
06-26-10 08:25 PM
v3.2.11
477kB
Shadowed
06-21-10 11:23 PM
r20100509
474kB
Shadowed
05-10-10 12:36 AM
r20100401
471kB
Shadowed
04-01-10 01:08 AM
r20100329
469kB
Shadowed
03-29-10 02:23 AM
r20100324
467kB
Shadowed
03-24-10 03:38 PM
r20100322
465kB
Shadowed
03-22-10 08:24 PM
v3.2.5
467kB
Shadowed
02-18-10 03:33 PM
v3.2.4
467kB
Shadowed
02-18-10 11:08 AM
v3.2.3
467kB
Shadowed
02-18-10 04:47 AM
v3.2.2
465kB
Shadowed
02-17-10 09:50 PM
v3.2
466kB
Shadowed
02-17-10 08:16 PM
v3.1
462kB
Shadowed
01-17-10 05:23 PM
v3.0.6
453kB
Shadowed
12-24-09 05:40 PM
v3.0.5
452kB
Shadowed
12-23-09 07:35 PM
v3.0.4
455kB
Shadowed
12-23-09 04:31 PM
v3.0.3
450kB
Shadowed
12-14-09 02:24 AM
v3.0.2
447kB
Shadowed
12-10-09 11:10 AM
v3.0.1
444kB
Shadowed
12-08-09 11:57 PM
v3
433kB
Shadowed
12-07-09 10:25 PM
r20091128
492kB
Shadowed
11-28-09 02:38 AM
r20091127
492kB
Shadowed
11-27-09 03:37 PM
r20091124
492kB
Shadowed
11-24-09 10:09 AM
r20091123
492kB
Shadowed
11-24-09 01:05 AM
r20091103
484kB
Shadowed
11-04-09 01:13 AM
r20091020
482kB
Shadowed
10-20-09 08:49 PM
r20091013
473kB
Shadowed
10-13-09 09:12 AM
r20091004
472kB
Shadowed
10-04-09 10:31 AM
r20090930
471kB
Shadowed
09-30-09 11:08 PM
r20090927
468kB
Shadowed
09-27-09 03:25 AM
r20090915
460kB
Shadowed
09-15-09 10:43 PM
r20090914
460kB
Shadowed
09-14-09 07:58 PM
r20090913
459kB
Shadowed
09-13-09 09:00 PM
r20090813
431kB
Shadowed
08-13-09 11:37 AM


Post A Reply Comment Options
Unread 11-27-09, 01:40 PM  
Zhoktov
A Kobold Labourer

Forum posts: 0
File comments: 3
Uploads: 0
Buffs

Is there a way to revert buff display to the standard Blizzard display, i.e. on the side of the minimap?
Report comment to moderator  
Reply With Quote
Unread 11-27-09, 11:50 AM  
Shadowed
...
Featured Addon Author

Forum posts: 387
File comments: 2513
Uploads: 99
Yea, the configuration uses a lot of memory because of it's size and complexity, but it's not loaded until it's needed anyway.
Report comment to moderator  
Reply With Quote
Unread 11-27-09, 11:39 AM  
ac3r
A Murloc Raider
AddOn Author - Click to view AddOns

Forum posts: 4
File comments: 27
Uploads: 1
Originally posted by Shadowed

ac3r: Memory isn't a profiling stat, an addon that uses 10 MB can perform just as well as an addon that uses 10 KB. And SUF doesn't use 3 MB passively anyway, so either you have 20 profiles, you opened the configuration or you were in a 25 man raid.

Addons like XPerl don't actually use less memory, they just cheat and split it off into extra modules. If you either add up all of the modules in XPerl or use a profiling addon like http://www.wowinterface.com/download...nProfiler.html you would end up with either higher, or equal numbers.
[/b]
thanks for explanation. didnt know that.
and yes i opened the configuration too - its load on demand?
Report comment to moderator  
Reply With Quote
Unread 11-27-09, 11:22 AM  
Shadowed
...
Featured Addon Author

Forum posts: 387
File comments: 2513
Uploads: 99
Buzku: It's a Blizzard issue, nothing I can really do about it as well unit frames have this issue. You either need to use a macro with /focus target in it or set a key binding to focus units.

Rhod: I don't plan on allowing toggling the Rare/Elite dragons since it doesn't fit into the frame design that well.

ac3r: Memory isn't a profiling stat, an addon that uses 10 MB can perform just as well as an addon that uses 10 KB. And SUF doesn't use 3 MB passively anyway, so either you have 20 profiles, you opened the configuration or you were in a 25 man raid.

Addons like XPerl don't actually use less memory, they just cheat and split it off into extra modules. If you either add up all of the modules in XPerl or use a profiling addon like http://www.wowinterface.com/download...nProfiler.html you would end up with either higher, or equal numbers.

Malath: Nope, you can change the side the portraits located on, but not the facing.

DamonDK: Yes and no, you can't get it to mimic Grid exactly in each row being one group (yet), but you can make it grow that way at least. Go to /suf -> Units -> Raid -> Raid, set Frame Growth to Down, and set Column Growth to Right.

Mook & Zidomo: How odd, I'm not sure why this is happening but I'm looking into it.
Last edited by Shadowed : 11-27-09 at 11:24 AM.
Report comment to moderator  
Reply With Quote
Unread 11-27-09, 11:04 AM  
Buzku
A Kobold Labourer

Forum posts: 0
File comments: 1
Uploads: 0
Just like with X-perl, I get error with using focus target and the focus frame won't work.

*** TaintForced *** causes it, any ideas on how to fix it?
Report comment to moderator  
Reply With Quote
Unread 11-27-09, 11:00 AM  
Rhod
A Kobold Labourer

Forum posts: 0
File comments: 3
Uploads: 0
Love this mod so far. The only thing I miss from Xperl is the ability to toggle the Blizzard "Elite" and "Rare" Dragons on the target bar. Any chance of adding this in the future? Thanks for your work.
Report comment to moderator  
Reply With Quote
Unread 11-27-09, 10:18 AM  
ac3r
A Murloc Raider
AddOn Author - Click to view AddOns

Forum posts: 4
File comments: 27
Uploads: 1
hmm shadowed unit frames used ~3 mb
why so much? other addons like xperl had ~500 kb - 1mb
Report comment to moderator  
Reply With Quote
Unread 11-27-09, 07:28 AM  
Malath
A Kobold Labourer

Forum posts: 0
File comments: 1
Uploads: 0
Is there an easy way to flip the target portrait frame so it's facing the left?

I can't seem to find anything for it, most unitframe addons I've used seem to lack this feature...
Report comment to moderator  
Reply With Quote
Unread 11-27-09, 05:24 AM  
DamonDK
A Deviate Faerie Dragon
AddOn Author - Click to view AddOns

Forum posts: 14
File comments: 31
Uploads: 2
Originally posted by Shadowed
DamonDK: That tag works fine, I suspect you entered the tag name incorrectly in the /suf -> Units -> <unit> -> Text option, make sure you have Lua errors on too in ESC -> Game Menu -> Help -> Display Lua Errors
That turned out to be it. I just put a checkmark in the "test" under Misc.Category and that added [()test] to the field text.
When I manually edited it down to [test] it worked fine.

On another note :
Is it possible to have vertical groups in your raid unitframe?

I'm trying to make a 8 x 5 grid like this : G1.1 = Group 1, first member

G1.1 G2.1 G3.1 G4.1 G5.1 G6.1 G7.1 G8.1
G1.2 G2.2 G3.2 G4.2 G5.2 G6.2 G7.2 G8.2
G1.3 G2.3 G3.3 G4.3 G5.3 G6.3 G7.3 G8.3
G1.4 G2.4 G3.4 G4.4 G5.4 G6.4 G7.4 G8.4
G1.5 G2.5 G3.5 G4.5 G5.5 G6.5 G7.5 G8.5

Atm I can only make it be like
G1.1 G1.2 G1.3 G1.4 G1.5 G2.1 G2.2 G2.3
G2.4 G2.5 G3.1 G3.2 G3.3 G3.4 G3.5 G4.1
G4.2 G4.3 G4.4 G4.5 G5.1 G5.2 G5.2 G5.3
G5.5 G6.1 G6.2 G6.3 G6.4 G6.5 G7.1 G7.2
G7.3 G7.4 G7.5 G8.1 G8.2 G8.3 G8.4 G8.5

Thanks in advance and ty for the quick reply.
Report comment to moderator  
Reply With Quote
Unread 11-27-09, 12:19 AM  
Mook
A Murloc Raider
AddOn Compiler - Click to view compilations

Forum posts: 6
File comments: 128
Uploads: 1
I'm afraid I'm still having the same problem too, with Party Target / Party Pet frames sometimes not showing.

Using the latest release (r20091124) - here's a screenie. The Mage Moak, party member #4 - I have him targeted, and can see he's targeting Infinite Adversary (the unit frame just to the right of the center IceHud), but on the actual Party frames his Party Target isn't showing up. This was a 4-man group, they invited me in, I headed out to Culling of Stratholme to join them:



Here's the debug info:

Code:
---- Child dump

Frame SUFChildpartytarget2, unit parent party2, unit party2target, unit owner party2target, guid 0xF130006C5E1CCB7E, actual guid 0xF130006C5E1CCB7E, shown 1, visible 1, format party%dtarget, parentUnit party2, point TOPRIGHT, pointParent SUFHeaderpartyUnitButton2, parent SUFHeaderpartyUnitButton2, attrib exists nil, attrib disableSwap nil, attrib isVehicle nil, status nil.

Frame SUFChildpartytarget1, unit parent party1, unit party1target, unit owner party1target, guid 0xF130006C601CCB7D, actual guid 0xF130006C5F1CCB7B, shown 1, visible 1, format party%dtarget, parentUnit party1, point TOPRIGHT, pointParent SUFHeaderpartyUnitButton1, parent SUFHeaderpartyUnitButton1, attrib exists nil, attrib disableSwap nil, attrib isVehicle nil, status nil.

Frame SUFChildpartypet2, unit parent party2, unit partypet2, unit owner partypet2, guid nil, actual guid nil, shown nil, visible nil, format partypet%d, parentUnit party2, point TOPRIGHT, pointParent SUFHeaderpartyUnitButton2, parent SUFHeaderpartyUnitButton2, attrib exists false, attrib disableSwap nil, attrib isVehicle false, status nil.

Frame SUFChildpartytarget3, unit parent party3, unit party3target, unit owner party3target, guid 0xF130006C5F1CCB7B, actual guid 0xF130006C5F1CCB7B, shown 1, visible 1, format party%dtarget, parentUnit party3, point TOPRIGHT, pointParent SUFHeaderpartyUnitButton3, parent SUFHeaderpartyUnitButton3, attrib exists nil, attrib disableSwap nil, attrib isVehicle nil, status nil.

Frame SUFChildpartypet3, unit parent party3, unit partypet3, unit owner partypet3, guid nil, actual guid nil, shown nil, visible nil, format partypet%d, parentUnit party3, point TOPRIGHT, pointParent SUFHeaderpartyUnitButton3, parent SUFHeaderpartyUnitButton3, attrib exists false, attrib disableSwap nil, attrib isVehicle false, status nil.

Frame SUFChildpartypet1, unit parent party1, unit partypet1, unit owner partypet1, guid nil, actual guid nil, shown nil, visible nil, format partypet%d, parentUnit party1, point TOPRIGHT, pointParent SUFHeaderpartyUnitButton1, parent SUFHeaderpartyUnitButton1, attrib exists false, attrib disableSwap nil, attrib isVehicle false, status nil.


---- Parent dump

Frame SUFHeaderpartyUnitButton1, wrapped? true, last unit party1, unit party1, unit owner party1, guid 0x050000000035C0C7, actual guid 0x050000000035C0C7 (Melkannat), shown 1, visible 1, total children 2, children SUFChildpartypet1, SUFChildpartytarget1

Frame SUFHeaderpartyUnitButton2, wrapped? true, last unit party2, unit party2, unit owner party2, guid 0x05000000007E4AFD, actual guid 0x05000000007E4AFD (Trillana), shown 1, visible 1, total children 2, children SUFChildpartypet2, SUFChildpartytarget2

Frame SUFHeaderpartyUnitButton3, wrapped? true, last unit party3, unit party3, unit owner party3, guid 0x050000000038256A, actual guid 0x050000000038256A (Deelilah), shown 1, visible 1, total children 2, children SUFChildpartypet3, SUFChildpartytarget3


---- Party setting dump

scale = [1]
showPlayer = [false]
hideAnyRaid = [true]
offset = [76]
hideSemiRaid = [false]
enabled = [true]
width = [225]
attribAnchorPoint = [left]
sortOrder = [ASC]
sortMethod = [INDEX]
height = [70]
attribPoint = [TOP]

---- Main tank setting dump

scale = [1]
groupBy = [GROUP]
attribAnchorPoint = [left]
offset = [20]
columnSpacing = [5]
enabled = [false]
groupFilter = [MAINTANK]
width = [150]
maxColumns = [1]
sortOrder = [ASC]
sortMethod = [INDEX]
height = [40]
unitsPerColumn = [5]
attribPoint = [TOP]

---- Main assist setting dump

scale = [1]
groupBy = [GROUP]
attribAnchorPoint = [left]
offset = [20]
columnSpacing = [5]
enabled = [false]
groupFilter = [MAINASSIST]
width = [150]
maxColumns = [1]
sortOrder = [ASC]
sortMethod = [INDEX]
height = [40]
unitsPerColumn = [5]
attribPoint = [TOP]
Report comment to moderator  
Reply With Quote
Unread 11-26-09, 07:04 PM  
Zidomo
A Cliff Giant
 
Zidomo's Avatar

Forum posts: 76
File comments: 1046
Uploads: 0
Alpha build c3c853afc, 5-man party for heroic DTK which included 1 warlock. The warlock pet (Imp) frame never appeared during the run. As with the prior reported problem, the party member with the pet frame problem does not show up listed in Parent Dump:

Code:
---- Child dump

Frame SUFChildpartytarget2, unit parent party2, unit party2target, unit owner party2target, guid 0x020000000031CA07, actual guid nil, shown nil, visible nil, format party%dtarget, parentUnit party2, point TOPLEFT, pointParent SUFHeaderpartyUnitButton2, parent SUFHeaderpartyUnitButton2, attrib exists nil, attrib disableSwap nil, attrib isVehicle nil, status nil.

Frame SUFChildpartytarget3, unit parent party3, unit party3target, unit owner party3target, guid 0xF130003A2101590A, actual guid nil, shown nil, visible nil, format party%dtarget, parentUnit party3, point TOPLEFT, pointParent SUFHeaderpartyUnitButton3, parent SUFHeaderpartyUnitButton3, attrib exists nil, attrib disableSwap nil, attrib isVehicle nil, status nil.

Frame SUFChildpartypet2, unit parent party2, unit partypet2, unit owner partypet2, guid nil, actual guid nil, shown nil, visible nil, format partypet%d, parentUnit party2, point BOTTOMLEFT, pointParent SUFHeaderpartyUnitButton2, parent SUFHeaderpartyUnitButton2, attrib exists false, attrib disableSwap nil, attrib isVehicle false, status nil.

Frame SUFChildpartytarget1, unit parent party1, unit party1target, unit owner party1target, guid 0x02000000032E8A33, actual guid 0x0200000000328497, shown 1, visible 1, format party%dtarget, parentUnit party1, point TOPLEFT, pointParent SUFHeaderpartyUnitButton1, parent SUFHeaderpartyUnitButton1, attrib exists nil, attrib disableSwap nil, attrib isVehicle nil, status nil.

Frame SUFChildpartypet3, unit parent party3, unit partypet3, unit owner partypet3, guid nil, actual guid nil, shown nil, visible nil, format partypet%d, parentUnit party3, point BOTTOMLEFT, pointParent SUFHeaderpartyUnitButton3, parent SUFHeaderpartyUnitButton3, attrib exists false, attrib disableSwap nil, attrib isVehicle false, status nil.

Frame SUFChildpartypet1, unit parent party1, unit partypet1, unit owner partypet1, guid nil, actual guid nil, shown nil, visible nil, format partypet%d, parentUnit party1, point BOTTOMLEFT, pointParent SUFHeaderpartyUnitButton1, parent SUFHeaderpartyUnitButton1, attrib exists false, attrib disableSwap nil, attrib isVehicle false, status nil.


---- Parent dump

Frame SUFHeaderpartyUnitButton3, wrapped? true, last unit party3, unit party3, unit owner party3, guid 0x020000000031CA07, actual guid 0x020000000031CA07 (Character 1), shown 1, visible 1, total children 2, children SUFChildpartypet3, SUFChildpartytarget3

Frame SUFHeaderpartyUnitButton1, wrapped? true, last unit party1, unit party1, unit owner party1, guid 0x02000000030FD828, actual guid 0x02000000030FD828 (Character 2), shown 1, visible 1, total children 2, children SUFChildpartypet1, SUFChildpartytarget1

Frame SUFHeaderpartyUnitButton2, wrapped? true, last unit party2, unit party2, unit owner party2, guid 0x02000000032E8A33, actual guid 0x02000000032E8A33 (Character 3), shown 1, visible 1, total children 2, children SUFChildpartypet2, SUFChildpartytarget2


---- Party setting dump

scale = [1]
height = [50]
hideAnyRaid = [true]
offset = [20]
attribAnchorPoint = [left]
hideSemiRaid = [false]
enabled = [true]
width = [190]
sortOrder = [ASC]
sortMethod = [INDEX]
attribPoint = [TOP]

---- Main tank setting dump

scale = [1]
height = [50]
columnSpacing = [5]
groupBy = [GROUP]
enabled = [false]
offset = [20]
hideSemiRaid = [false]
unitsPerColumn = [5]
attribAnchorPoint = [left]
groupFilter = [MAINTANK]
width = [190]
maxColumns = [2]
sortOrder = [ASC]
sortMethod = [INDEX]
hideAnyRaid = [true]
attribPoint = [TOP]

---- Main assist setting dump

scale = [1]
height = [50]
columnSpacing = [5]
groupBy = [GROUP]
enabled = [false]
offset = [20]
hideSemiRaid = [false]
unitsPerColumn = [5]
attribAnchorPoint = [left]
groupFilter = [MAINASSIST]
width = [190]
maxColumns = [2]
sortOrder = [ASC]
sortMethod = [INDEX]
hideAnyRaid = [true]
attribPoint = [TOP]
Report comment to moderator  
Reply With Quote
Unread 11-26-09, 11:28 AM  
Shadowed
...
Featured Addon Author

Forum posts: 387
File comments: 2513
Uploads: 99
DamonDK: That tag works fine, I suspect you entered the tag name incorrectly in the /suf -> Units -> <unit> -> Text option, make sure you have Lua errors on too in ESC -> Game Menu -> Help -> Display Lua Errors

alfaer: Yes the update fixes it.
Report comment to moderator  
Reply With Quote
Unread 11-26-09, 04:16 AM  
DamonDK
A Deviate Faerie Dragon
AddOn Author - Click to view AddOns

Forum posts: 14
File comments: 31
Uploads: 2
Hey Shadowed, thanks for a great addon !

Sorry to report, but I'm having issues when creating new tags.

I wanted to make a tag that shortens unitnames down to 4 chars (to fit them into a Grid-lookalike raidframe with almost square raidframes)

I looked at your github wiki and found the example.



This is what happened. I included the tag text, which is identical to the one appearing on the github wiki, apart from the 10 being changed to a 4 (for 4 chars long).

Unfortunatly, when I activate this tag, the whole targetframe blanks out

Any suggestions as to what went wrong?
Report comment to moderator  
Reply With Quote
Unread 11-26-09, 02:28 AM  
alfaer
A Kobold Labourer

Forum posts: 0
File comments: 1
Uploads: 0
Hey there - great addon! I much prefer it to pitbull for a few reasons so ghope you stick with this. It's wonderful.. thank you

The same bug as VPR (quoted below) popped up a day or two ago and is on all my characters now. Any port brings up an error it seems. I've just this minute downloaded the update so hopefully that'll fix it *tentacles crossed*

Originally posted by vpr
Got this error after taking a mage portal to Dalaran:

Code:
[2009/11/24 20:11:50-29-x1]: ShadowedUnitFrames\modules\indicators.lua:267: attempt to index local 'frame' (a boolean value)

  ---
Last edited by alfaer : 11-26-09 at 02:30 AM.
Report comment to moderator  
Reply With Quote
Unread 11-24-09, 10:08 AM  
Shadowed
...
Featured Addon Author

Forum posts: 387
File comments: 2513
Uploads: 99
Indicators error fixed, update.
Report comment to moderator  
Reply With Quote
Post A Reply



Category Jump:

Support AddOn Development!

You have just downloaded by the author . If you like this AddOn why not consider supporting the author? This author has set up a donation account. Donations ensure that authors can continue to develop useful tools for everyone.