Download
(19 MB)
Download
Updated: 10-15-12 11:31 AM
Pictures
File Info
Compatibility:
Mists of Pandaria (5.0.4)
Updated:10-15-12 11:31 AM
Created:10-16-10 06:59 PM
Downloads:9,295
Favorites:14
MD5:
Categories:Generic Compilations, Class Compilations, Healer Compilations
CalaiUI  Popular! (More than 5000 hits)
Version: 4.0.2
by: TheGeek [More]


4.0 » The rise of Lordaeron!

2560 x 1600 resolution designed interface

It's been quite some time since I last touched CalaiUI--with the launch of Mists of Pandaria; it seemed befitting to update and bring something new to the community.

In the past, CalaiUI was built for every class. However, this time around it's only built for Paladins. What does that mean? It means you will need to do a little work on a few small things for it to work with other classes. The reason for this is that awhile back I decided to delete every level 85 character I had for every class. It was becoming too time consuming and I rather focus on my Paladin that I enjoy greatly!

So, to the show. I hope you enjoy the UI; it would not have been possible without the amazing support and careful programmers of the many addons used in my suite.

Most of all; my inspiration; Lui!


Always check the Change Log for update information!


Installation Instructions
  1. Shutdown World of Warcraft.
  2. Create a backup of your Interface and WTF folders. Delete them once you have finished.
  3. Copy the Interface and WTF folders from the zip file to your WoW directory.
  4. Go into the WTF folder and rename ACCOUNTNAME, REALMNAME, CHARNAME. Please verify your information for each of these three folders, we've had countless support emails about this and it's all boiled down to incorrect typing of required names.
  5. To keep saved keybindings and macros, drop the bindings-cache, bindings.cache.old, macros-cache, and macros-cache.old from your backup character folder into your new character folder.
  6. Start WoW
  7. Ensure that ALL ADDONS are enabled.


Configure InGame

Once you load WoW and log into your character everything will be scattered throughout the middle of your screen. Do not fear.

Simply type /reflux switch CalaiUI (exactly how it's typed) and watch your UI reload.

The chat frame is not bounded to the kgPanels at the left and right--it is your responsibility to unlock and set your frames as you see.

If you wish to not use those frames:
  1. Type /kgpanels
  2. Go to Active Panels
  3. Delete chat_left or chat_right respectively

Type /reload to reload the UI.

Reflux has been updated to work, but has been known at times to not. If you are having problems with your UI not looking like our examples, please open up an addon and check the profiles tab. You should see "CalaiUI" as a profile option.

There is a known bug that if you have an account name with numbers you must ensure you copy/type it exactly how it is or addons will not load properly.


Additional Information - please read this!


HELP! I need to update Deadly Boss Mods

I'm using a DBM template that another addon user created and put up on WoWI. The issue, every time a new DBM is released I have to backup some files before I replace.

So, if you are going to update DBM you need to do the following first!
  1. Go to your DBM-Core folder and copy the "textures" and "DBT-Template.xml" file to your desktop
  2. Install the newest DBM download
  3. Copy the files you just backed up to the DBM-Core folder and overwrite the ones that came with the latest download

Special Action Bar?

The Special Action Bar (introducted in Cataclysm) is located in the middle just above Grid.


What about more action bars, aura bars, shape shift bars?

You will need to enable and place them where you see fit.

Type /bt and choose the appropriate bar(s) you require.


Where is the Target Casting Bar?

My mainspec is Holy, therefore I do not need to see what my mates are casting.

To unhide;
  1. Type /quartz
  2. Select "Target"
  3. Check "Enable"

Grid Layout - Healer and Tank/DPS

I have created two different layouts for you to use. The primary layout is setup for Holy; it's a simple centered above action buttons so that I can see what is going on and watch my cooldowns.

You will need to adjust the Grid profile for your taste; by default when you set this up it will automatically use the Tank/DPS layout.

Grid Profile Name

CalaiUI - this is a smaller more compact raid frame that sits mid screen far left.
CalaiUI - Healer - this is the layout you see in my screenshots.


Recount panel is way out of whack!

You may experience a small habit where Recount's window will move. Whatever you do, do not use kgpanels move panels option, all panels are tied to the addons so you need to move that specific addon. To do this with recount, follow these steps;
  1. Type /recount config
  2. Select Window, unlock window
  3. Drag Recount's window until it is back in the proper space

Recount is not coloring my class properly!

In recount we setup the coloring to show all classes outside of a Paladin as darker gray and the Paladin class lighter gray. The purpose behind this was visual reference at speed; locating a lighter bar against darker bar helps you find your place--especially when you need to monitor your HPS (Heals per Second).

To make this appropriate for your class outside of a Paladin, follow these steps:
  1. Open up Interface » Recount » Profile
  2. Type the name of your class in the "New" box and click OK
  3. Below that select one of the Paladin class in the "Copy From" and click OK
  4. You will see the Recount GUI behind you, close the interface options window and go to the GUI
  5. Select "Color" and you will see how all the classes are same color except Paladin
  6. Click the color box next to your class; adjust it to match the Paladin class
  7. Click the color box next to Paladin; adjust it to match all the other classes

Addons

I would like to thank these additional authors whose contributions have helped us develop a better interface for the community.
  • !Beautycase
  • !BugGrabber
  • Align
  • Ara Broker Guild & Friends
  • Ara Broker Money
  • Ara Broker Reputations
  • Ara Broker Spec Switcher
  • Bagnon
  • Bartender 4
  • Broker Durability
  • Broker Group
  • Broker RaidSave
  • Broker uClock
  • Bugsack
  • Chinchilla
  • Clean HotKey
  • Deadly Boss Mods
  • Docking Station
  • ForteXorcist
  • Grid
  • Grid Status MTs
  • Grid Status Raid Icons
  • Inventory Item Levels
  • kgPanels
  • KuiNameplates
  • Mapster
  • Masque
  • Mik's Scrolling Battle Text
  • MovableHolyPower
  • oGlow
  • Omen
  • OmniCC
  • PallyPower
  • Pitbull4
  • Postal
  • Prat
  • Quartz
  • Raven
  • Recount
  • Reflux
  • Shako
  • SharedMedia
  • TipTac
  • XLoot
  • XLoot Group

Thank you again for trying this UI out and I hope it serves the needs of you!


4.0.3
» Toggle Buttons for Omen and Recount

4.0.2
» Missing MicroMenu Highlight image in zip file.

4.0.1
» Modify Micromenu Button Texture.

4.0
» New Layout.
» Refreshed MOP-compatible addons.

3.3.1
» Fixed xpbarnone setfont tag.

3.3
» Updated core addons to support changes in 4.2; some addons have still not been updated by their authors; performed toc bumps just to clean up interface.
» Added the new totems/weapon buffs bars to the bottom of the player unitframe (see description notes on activating them.)
» Changed font string for all addons to "DeckerB", it's a much better looking font for a 30 inch monitor.
» Cleaned up alignment on some addons.
» Integrated the new DBM template addon.
» Moved to KUI Namplates instead of caelNameplates.

3.2
» Updated core addons to support changes in 4.0.6

3.1
» Implemented the new Unit Frames.

3.0
» Updated all addons to most current release.
» Modified the BT bars so that they do not interfere with Druid shapeshifting (just started playing a Feral).
» Updated Pitbull frames with newer textures to give it a more robust look, increased mana bar size. Will be working with re-designing it entirely, stay tuned to the comments section.
» Integrated the new Movable Holy Power into package for Paladins.
» Added Trinket Bars back to release.

2.0
» Updated all addons to most current release.
» Modified some panels and added a 7th bar to allow for trinket placement.
» Integrated XPBarNone to build for those who are not under level 80.
» Cleaned up some of the modified codes.
» Integrated SBF 3.2 beta to include right clicking off buffs now.

1.3
» added a new optional WTF file for 1920x1080 *Thanks Toxicdust for doing this!
» removed xloot 1.0 and replaced it with xloot (includes monitor and group.)

1.2
» updated the Optional 1024 resolution WTF with an actual one built off a friend who has a true 1024. I had mine almost close, but it was better to have one of an actual player. Should help out those under 1600 resolution.

1.1
» added SexyGrid to the UI. I worked through the Lua and modified it so that it would work with the newest Grid release. If the original author disapproves, please contact me and I will remove it.

If you downloaded 1.0, you don't need to reinstall the entire UI. Just grab !BeautyCase and Grid from the addons folder in the zip and copy it to WOW. Then go into the WTF and get the two Grid files from "SavedVariables" and copy them to your global folder in WTF. This is not available for the 1024 optional file, sorry.

1.0
» initial release
Post A Reply Comment Options
Unread 10-22-10, 02:14 PM  
TheGeek
A Firelord
 
TheGeek's Avatar
AddOn Author - Click to view AddOns

Forum posts: 494
File comments: 216
Uploads: 8
Originally posted by Smoker77
Course Client zeigt mir einige Addon updates.
Kann ich modified oder Unconfirmed Addons updaten oder schreddert das dann die UI?
Das einzige Addon Sie nicht aktualisieren konnen, ist Grid. Sie hat einen speziellen Code.
__________________
TheGeek is offline Report comment to moderator  
Reply With Quote
Unread 10-22-10, 12:59 PM  
Smoker77
A Kobold Labourer

Forum posts: 0
File comments: 8
Uploads: 0
Course Client zeigt mir einige Addon updates.
Kann ich modified oder Unconfirmed Addons updaten oder schreddert das dann die UI?
Smoker77 is offline Report comment to moderator  
Reply With Quote
Unread 10-22-10, 10:21 AM  
TheGeek
A Firelord
 
TheGeek's Avatar
AddOn Author - Click to view AddOns

Forum posts: 494
File comments: 216
Uploads: 8
Originally posted by Mordrod
Hiho,

erstmal danke für deine Mühen, sieht alles sehr schick aus.

Habe nur das Problem das ich die Gruppenmitglieder nicht sehe (pitbull) sowie die Mitglieder im Schlachtzug bei grid.

kannst du mir helfen?

danke
Hallo

Stellen Sie sicher, dass das Addon !Beautycase eingeschaltet ist. Wenn es nicht ist, wird Grid nicht richtig zeigen.

Originally posted by martyisokay
Here you go! I am not a code reader so I have no idea what it means. And it is always with TipTac. I am using TipTac version 10.10.19 off of this site.

2x TipTac-10.10.19\core.lua:611: <unnamed>:SetText(): Font not set
TipTac-10.10.19\core.lua:611: in function <TipTac\core.lua:609>
TipTac-10.10.19\core.lua:630: in function <TipTac\core.lua:624>
TipTac-10.10.19\core.lua:1130: in function <TipTac\core.lua:1109>
TipTac-10.10.19\core.lua:1184: in function `ApplyGeneralAppearance'
TipTac-10.10.19\core.lua:908: in function <TipTac\core.lua:878>
<in C code>: ?

Locals:
fs = <unnamed> {
0 = <userdata>
}
val = 37800
max = 37800
type = "none"
FormatValue = <function> @ TipTac\core.lua:598:

---
Check two things for me;

Go to the addons screen ingame and check that the following are enabled;

LibSharedMedia-3.0
SharedMedia
SharedMedia Additional Fonts

Then log into a character and open up tiptac (/tiptac). Click the font menu and verify that the font is select.

Originally posted by dttk0009
Hi Calai,

First off, great UI. Sort of like a lightweight LUI (which is also a fantastic UI). However, I'm experiencing a bug with my quest tracker. It doesn't seem to show any of my tracked quests (and using add-ons that show quest objectives don't work either). Also want to point out that this only happens on one of my characters (a rogue). On my priest it seems to work just fine. Here's a dump of the error:
Hmm, I want to say that it is one of those weird errors that randomly come up. The XML bugging is the blizzard UI, but doesn't tell me anything in regards to addons doing it.

I know I had a ton of weird bugs popping up the last few days with QuestGuru after Blizz made some changes.

Let me do some digging.
__________________
TheGeek is offline Report comment to moderator  
Reply With Quote
Unread 10-22-10, 08:01 AM  
dttk0009
A Kobold Labourer

Forum posts: 0
File comments: 4
Uploads: 0
Hi Calai,

First off, great UI. Sort of like a lightweight LUI (which is also a fantastic UI). However, I'm experiencing a bug with my quest tracker. It doesn't seem to show any of my tracked quests (and using add-ons that show quest objectives don't work either). Also want to point out that this only happens on one of my characters (a rogue). On my priest it seems to work just fine. Here's a dump of the error:

1x Interface\FrameXML\WatchFrame.lua:866: WatchFrameLine2:SetPoint(): WatchFrameLine7 is dependent on this:
Interface\FrameXML\WatchFrame.lua:866: in function `?':
Interface\FrameXML\WatchFrame.lua:387: in function `WatchFrame_Update':
Interface\FrameXML\WatchFrame.lua:250: in function <Interface\FrameXML\WatchFrame.lua:238>:

Locals:
lineFrame = WatchFrameLines {
0 = <userdata>
numFunctions = 0
updateFunctions = <table> {}
AutoQuestShadow = WatchFrameLinesAutoQuestShadow {}
}
nextAnchor = WatchFrameLine7 {
0 = <userdata>
dash = WatchFrameLine7Dash {}
text = WatchFrameLine7Text {}
frameCache = <table> {}
Reset = <function> @ Interface\FrameXML\WatchFrame.lua:1227:
}
maxHeight = 140.00006318981
frameWidth = 192
_ = nil
questTitle = WatchFrameLine2 {
0 = <userdata>
dash = WatchFrameLine2Dash {}
text = WatchFrameLine2Text {}
frameCache = <table> {}
Reset = <function> @ Interface\FrameXML\WatchFrame.lua:1227:
}
questIndex = 3
line = nil
lastLine = nil
linkButton = nil
watchItemIndex = 0
numVisible = 0
numPOINumeric = 0
numPOICompleteIn = 0
numPOICompleteOut = 0
text = nil
finished = nil
numQuestWatches = 2
numObjectives = 2
title = "Threat From Above"
level = 80
questTag = "Group"
suggestedGroup = 3
isHeader = nil
isCollapsed = nil
isComplete = nil
isDaily = 1
questID = 13809
maxWidth = 0
lineWidth = 0
topEdge = 0
playerMoney = 63315436
(for index) = 1
(for limit) = 2
(for step) = 1
i = 1
questFailed = false
requiredMoney = 0
filterOK = true
link = nil
item = nil
charges = nil
showItemWhenComplete = nil
WatchFrame_ResetQuestLines = <function> @ Interface\FrameXML\WatchFrame.lua:194:
WATCHFRAME_SETLINES = <table> {
1 = WatchFrameLine2 {}
}
WatchFrame_GetQuestLine = <function> @ Interface\FrameXML\WatchFrame.lua:182:
IS_HEADER = true
DASH_NONE = 0
DASH_HIDE = 2
DASH_SHOW = 1
questLineIndex = 2
WatchFrame_GetLinkButton = <function> @ Interface\FrameXML\WatchFrame.lua:62:
WatchFrame_ReleaseUnusedQuestLines = <function> @ Interface\FrameXML\WatchFrame.lua:198:

---

Best of luck
Last edited by dttk0009 : 10-22-10 at 08:29 AM.
dttk0009 is offline Report comment to moderator  
Reply With Quote
Unread 10-22-10, 07:47 AM  
martyisokay
A Kobold Labourer

Forum posts: 0
File comments: 5
Uploads: 0
Originally posted by StormCalai
Do me a favor, click the bag and it will open a window with the Lua error. Can you please post that error here so I can see what is happening.
Here you go! I am not a code reader so I have no idea what it means. And it is always with TipTac. I am using TipTac version 10.10.19 off of this site.

2x TipTac-10.10.19\core.lua:611: <unnamed>:SetText(): Font not set
TipTac-10.10.19\core.lua:611: in function <TipTac\core.lua:609>
TipTac-10.10.19\core.lua:630: in function <TipTac\core.lua:624>
TipTac-10.10.19\core.lua:1130: in function <TipTac\core.lua:1109>
TipTac-10.10.19\core.lua:1184: in function `ApplyGeneralAppearance'
TipTac-10.10.19\core.lua:908: in function <TipTac\core.lua:878>
<in C code>: ?

Locals:
fs = <unnamed> {
0 = <userdata>
}
val = 37800
max = 37800
type = "none"
FormatValue = <function> @ TipTac\core.lua:598:

---
martyisokay is offline Report comment to moderator  
Reply With Quote
Unread 10-22-10, 07:25 AM  
Mordrod
A Kobold Labourer

Forum posts: 0
File comments: 1
Uploads: 0
Hiho,

erstmal danke für deine Mühen, sieht alles sehr schick aus.

Habe nur das Problem das ich die Gruppenmitglieder nicht sehe (pitbull) sowie die Mitglieder im Schlachtzug bei grid.

kannst du mir helfen?

danke
Mordrod is offline Report comment to moderator  
Reply With Quote
Unread 10-22-10, 04:22 AM  
steste
A Defias Bandit
 
steste's Avatar

Forum posts: 3
File comments: 17
Uploads: 0
Originally posted by StormCalai
That is wmarkup used for target marking when you are a raid leader or party leader. If you type /wmarkup it will open the config panel. It looks like the settings didn't save, which doesn't surprise me as wmarkup has a horrible savedvariables setup. I'm looking into fixing that since the Author doesn't quite get it.

I have that addon attached to a panel so what you need to do is join a party as a leader. That will auto load the markings. When you do that type /wmarkup and set the scale to 65%. Move the bar to where you want it (you will see the black panel background I put behind it) I normally put mine above the Grid panel at the top left corner. Once you get it set hit the "lock" checkmark and those two side boxes will disappear giving you a clean black box with the markings. The '?' icon initiates a readycheck for your raid. This is one of the best marking addons I have used, I love it.
/wm options
steste is offline Report comment to moderator  
Reply With Quote
Unread 10-21-10, 12:35 PM  
TheGeek
A Firelord
 
TheGeek's Avatar
AddOn Author - Click to view AddOns

Forum posts: 494
File comments: 216
Uploads: 8
Originally posted by martyisokay
I downloaded the new one, TIPTAC, from this site and it still gives a ton of errors when you 'mouseover' a toon. I just turned off the alarm since I don't notice the errors anyhow. Just thought I'd let you know.
Do me a favor, click the bag and it will open a window with the Lua error. Can you please post that error here so I can see what is happening.
__________________
TheGeek is offline Report comment to moderator  
Reply With Quote
Unread 10-21-10, 10:50 AM  
martyisokay
A Kobold Labourer

Forum posts: 0
File comments: 5
Uploads: 0
Originally posted by StormCalai
That is bugsack, little green or red bag at top right corner. It says Fatality which means something is erroring on you.

If you are getting an error when mousing over someone you may need to go download the new TipTac and replace it in my addons folder. There was a blizzard paperdoll bug that would trip tiptac.

I downloaded the new one, TIPTAC, from this site and it still gives a ton of errors when you 'mouseover' a toon. I just turned off the alarm since I don't notice the errors anyhow. Just thought I'd let you know.
martyisokay is offline Report comment to moderator  
Reply With Quote
Unread 10-21-10, 08:42 AM  
TheGeek
A Firelord
 
TheGeek's Avatar
AddOn Author - Click to view AddOns

Forum posts: 494
File comments: 216
Uploads: 8
Originally posted by raav
Hey mate, i have a problem.

I installed your ui pack and everything is great except on my paladin i have two weird boxes and i don't know what they are. (see screenshot)



what is this and how do i remove them?
That is wmarkup used for target marking when you are a raid leader or party leader. If you type /wmarkup it will open the config panel. It looks like the settings didn't save, which doesn't surprise me as wmarkup has a horrible savedvariables setup. I'm looking into fixing that since the Author doesn't quite get it.

I have that addon attached to a panel so what you need to do is join a party as a leader. That will auto load the markings. When you do that type /wmarkup and set the scale to 65%. Move the bar to where you want it (you will see the black panel background I put behind it) I normally put mine above the Grid panel at the top left corner. Once you get it set hit the "lock" checkmark and those two side boxes will disappear giving you a clean black box with the markings. The '?' icon initiates a readycheck for your raid. This is one of the best marking addons I have used, I love it.
__________________
TheGeek is offline Report comment to moderator  
Reply With Quote
Unread 10-21-10, 07:36 AM  
raav
A Kobold Labourer

Forum posts: 0
File comments: 13
Uploads: 0
Hey mate, i have a problem.

I installed your ui pack and everything is great except on my paladin i have two weird boxes and i don't know what they are. (see screenshot)



what is this and how do i remove them?
raav is offline Report comment to moderator  
Reply With Quote
Unread 10-21-10, 12:01 AM  
TheGeek
A Firelord
 
TheGeek's Avatar
AddOn Author - Click to view AddOns

Forum posts: 494
File comments: 216
Uploads: 8
CalaiUI 2.0 -- Preview

I'm already planning ahead on some changes with CalaiUI for the big version 2.0

Here are some sneak peaks of a few changes; now none of these are permanent. They may change over the course of time from now until 2.0 is released. I didn't get a whole lot of actual raid time when I built version 1.0 as the patch was still buggy as all get out, but I hope with 2.0 to release a full running package from the get-go.

I still can't thank all of you that downloaded it and those of you who needed my help. I hope that I have answered and fixed everyone's issue with getting the UI running smoothly.

I look forward to the many more improvements down the road. Don't hesitate to send me your ideas either!







__________________
TheGeek is offline Report comment to moderator  
Reply With Quote
Unread 10-20-10, 06:04 PM  
TheGeek
A Firelord
 
TheGeek's Avatar
AddOn Author - Click to view AddOns

Forum posts: 494
File comments: 216
Uploads: 8
Originally posted by martyisokay
Really nice and clean UI! I had to adjust it to reflect my play-style some but, overall, very pleased. Nice job!

One thing, though - how do you turn off this little gnome saying "Vitality" in the background (or something to that effect) everytime I mouseover a NPC or someone else's toon? Really annoying.
That is bugsack, little green or red bag at top right corner. It says Fatality which means something is erroring on you.

If you are getting an error when mousing over someone you may need to go download the new TipTac and replace it in my addons folder. There was a blizzard paperdoll bug that would trip tiptac.

Originally posted by Barthman
Really nice UI mate !

Please what is the name of the addon displays the debuffs on target, the one who appears between pitbull player frame & target frame, and how to configure displayed debuffs.

thx again
That is actually a custom kgPanel with scripting that scans for certain things. The only way to modify it is to have it re-coded to show different buffs. It's mainly to show you what raid buffs are on the target in relation to warlocks, shamans, and druids.
__________________
TheGeek is offline Report comment to moderator  
Reply With Quote
Unread 10-20-10, 02:14 PM  
Barthman
A Kobold Labourer

Forum posts: 0
File comments: 1
Uploads: 0
Really nice UI mate !

Please what is the name of the addon displays the debuffs on target, the one who appears between pitbull player frame & target frame, and how to configure displayed debuffs.

thx again
Barthman is offline Report comment to moderator  
Reply With Quote
Unread 10-20-10, 09:36 AM  
martyisokay
A Kobold Labourer

Forum posts: 0
File comments: 5
Uploads: 0
Really nice and clean UI! I had to adjust it to reflect my play-style some but, overall, very pleased. Nice job!

One thing, though - how do you turn off this little gnome saying "Vitality" in the background (or something to that effect) everytime I mouseover a NPC or someone else's toon? Really annoying.
Last edited by martyisokay : 10-20-10 at 11:31 AM.
martyisokay is offline Report comment to moderator  
Reply With Quote
Post A Reply



Category Jump:

Support AddOn Development!

You have just downloaded by the author . If you like this AddOn why not consider supporting the author? This author has set up a donation account. Donations ensure that authors can continue to develop useful tools for everyone.