Go to Page... |
Compatibility: | Plunderstorm (10.2.6) Classic (1.15.0) WOTLK Patch (3.4.3) |
Updated: | 03-21-24 12:45 PM |
Created: | unknown |
Downloads: | 1,270,487 |
Favorites: | 3,570 |
MD5: |
Clique is a simple addon that enables powerful click-casting and hover-casting on your unit frames and in the 3D game world. You can bind virtually any mouse or keyboard combination to a spell or macro. In it's normal configuration this enables you to use the bindings over your unit frames in order to cast spells directly on that unit. This allows you to more quickly select both the spell to cast, and the target of the spell without requiring an extra click.
To begin with Clique, open your spellbook and click on the new tab that is shown there. You can also open the configuration GUI by running the /clique slash command. From this binding interface you can add, remove and alter any of your Clique bindings. You will be unable to make these changes when you are in combat due to limitations in the Blizzard API.
Binding a spell
Binding a spell is just a matter of finding the spell in your spellbook, putting your mouse over it, and performing the binding you would like to add. For example, if you'd like to set 'Regrowth' to activate on 'Shift-LeftButton', then you just find that spell in your spellbook and then Shift-LeftClick on it. You can also bind keyboard combinations, so you could do the same with Shift-R if you'd like.
Keep in mind when you are setting your bindings that they will override any bindings that are already set on the frame, for example the default bindings to 'Target unit' and 'Show unit menu'. You can override these bindings if you would like, but you should then set a new different combination that will activate the original functions
Binding the 'Target unit' or 'Show unit menu' actions
If you've rebound or lose these default bindings, you can re-bind them using the 'Bind other' button in the Clique configuration. Click on the button, and choose the correct action and you will be presented with a dialog box that allows you to set the binding for that action. Simply choose a new key combination, and you will be able to target units and open your menu again.
Binding a macro
Binding a macro can also be found on the 'Bind other' button. You'll be given a new window with instructions and suggestions about writing your macros, but other than that the process should seem very similar.
Managing click-sets
Each binding can belong to a number of binding-sets. These sets determine when the binding is active. The built-in binding-sets are as follows:
File Name |
Version |
Hits |
Size |
Author |
Date |
v90001-0.1.0-beta |
3,686 |
103kB |
Cladhaire |
08-16-20 12:47 PM |
|
v40000-1.2.7-7e91cea |
2,931 |
79kB |
Cladhaire |
10-16-10 10:31 AM |
|
2.0.0-abfbb36 |
2,410 |
43kB |
Cladhaire |
10-11-10 04:34 PM |
|
r129 |
2,800 |
67kB |
Cladhaire |
11-14-09 11:55 AM |
|
r125 |
2,474 |
67kB |
Cladhaire |
11-14-09 11:46 AM |
|
r127 |
2,383 |
67kB |
Cladhaire |
11-03-09 01:54 AM |
|
r121 |
2,701 |
67kB |
Cladhaire |
04-17-09 01:49 AM |
|
r108 |
3,590 |
58kB |
Cladhaire |
10-13-08 02:55 PM |
File Name |
Version |
Size |
Author |
Date |
v3.5.6-release |
234kB |
Cladhaire |
01-17-24 01:13 AM |
|
v3.5.5-release |
234kB |
Cladhaire |
11-09-23 03:25 PM |
|
v3.5.4-release |
234kB |
Cladhaire |
09-08-23 01:08 PM |
|
v3.5.3-release |
234kB |
Cladhaire |
08-30-23 04:05 AM |
|
v3.5.2-release |
235kB |
Cladhaire |
07-12-23 12:33 PM |
|
v3.5.1-release |
234kB |
Cladhaire |
05-03-23 09:47 AM |
|
v3.5.0-release |
234kB |
Cladhaire |
04-01-23 04:55 AM |
|
v3.4.15-release |
234kB |
Cladhaire |
03-22-23 12:35 PM |
|
v3.4.14-release |
234kB |
Cladhaire |
01-25-23 09:26 AM |
|
v3.4.13-release |
234kB |
Cladhaire |
01-21-23 02:39 AM |
|
v3.4.12-release |
234kB |
Cladhaire |
11-29-22 01:55 AM |
|
v3.4.11-release |
234kB |
Cladhaire |
11-28-22 06:32 AM |
|
v3.4.10-release |
234kB |
Cladhaire |
11-06-22 02:25 PM |
|
v3.4.7-release |
233kB |
Cladhaire |
11-02-22 02:28 AM |
|
v3.4.6-release |
233kB |
Cladhaire |
10-27-22 04:08 AM |
|
v3.4.5-release |
233kB |
Cladhaire |
10-26-22 07:55 AM |
|
v3.4.4-release |
232kB |
Cladhaire |
10-26-22 01:05 AM |
|
v3.4.2-release |
233kB |
Cladhaire |
10-25-22 01:18 PM |
|
v3.4.1-release |
232kB |
Cladhaire |
10-25-22 08:52 AM |
|
v3.4.0-release |
233kB |
Cladhaire |
10-25-22 08:47 AM |
|
v3.3.0 |
154kB |
Cladhaire |
09-02-22 06:36 AM |
|
v3.2.1 |
153kB |
Cladhaire |
08-31-22 11:13 AM |
|
v3.2.0 |
151kB |
Cladhaire |
08-21-22 08:26 AM |
|
v3.1.5 |
105kB |
Cladhaire |
08-17-22 11:13 AM |
|
v3.1.4 |
105kB |
Cladhaire |
06-02-22 11:53 AM |
|
v3.1.3 |
105kB |
Cladhaire |
02-22-22 04:40 PM |
|
v3.1.2 |
105kB |
Cladhaire |
11-04-21 01:13 PM |
|
v3.1.1 |
105kB |
Cladhaire |
06-30-21 06:15 AM |
|
v3.1.0 |
105kB |
Cladhaire |
06-01-21 04:05 AM |
|
v3.0.2 |
104kB |
Cladhaire |
05-30-21 02:03 AM |
|
v3.0.1 |
102kB |
Cladhaire |
05-15-21 01:46 AM |
|
v3.0.1 |
102kB |
Cladhaire |
05-15-21 01:43 AM |
|
v3.0.0 |
102kB |
Cladhaire |
05-15-21 01:39 AM |
|
v90005-2.0.2 |
102kB |
Cladhaire |
04-08-21 09:36 AM |
|
v90005-2.0.2-beta |
102kB |
Cladhaire |
04-08-21 09:30 AM |
|
v90005-1.0.1 |
112kB |
Cladhaire |
04-07-21 12:13 AM |
|
v90005-1.0.0 |
102kB |
Cladhaire |
04-07-21 12:03 AM |
|
v90005-1.0.0 |
103kB |
Cladhaire |
03-12-21 11:07 AM |
|
v90002-1.1.0 |
103kB |
Cladhaire |
02-21-21 05:33 AM |
Comment Options |
Analla |
View Public Profile |
Send a private message to Analla |
Find More Posts by Analla |
Add Analla to Your Buddy List |
09-25-07, 03:05 PM | ||
A Kobold Labourer
Forum posts: 0
File comments: 1
Uploads: 0
|
Re: Re: post patch issue.
|
|
|
kronagan |
View Public Profile |
Send a private message to kronagan |
Find More Posts by kronagan |
Add kronagan to Your Buddy List |
09-26-07, 12:59 AM | |
A Kobold Labourer
Forum posts: 0
File comments: 6
Uploads: 0
|
Pet Unit Frames?
Post on X Perl's comments too, but thought it might help here as well.
Bug related to Patch. I use Alt and Right Click and Alt and Left Click for buffing, but it won't do anything when I mouse over the pet in the party unitframes. Targeting them and then mousing over the target frame it works, but not from the party HuD. I have disabled X Perl and I am able to heal all frames from the default Party HuD so it leads me to believe that it's an X Perl issue stemming from the fact that the new patch might not recognize the pet party frame as a "real" frame. There were issues in the past with Xperl and pets, freezes in HP, non clearing negative and positive buffs. I'm not convinced it's just an X Perl issue and have posted on Clique's forums as well. Any ideas? |
|
Aeidian |
View Public Profile |
Send a private message to Aeidian |
Find More Posts by Aeidian |
Add Aeidian to Your Buddy List |
09-26-07, 02:41 AM | ||
|
Re: Pet Unit Frames?
__________________
"There's only one thing that I know how to do well and I've often been told that you only can do what you know how to do well, and that's be you-- be what you're like-- be like yourself. And so I'm having a wonderful time, but I'd rather be whistling in the dark..." |
|
|
Cladhaire |
View Public Profile |
Send a private message to Cladhaire |
Find More Posts by Cladhaire |
Add Cladhaire to Your Buddy List |
09-26-07, 04:16 AM | |
A Murloc Raider
Forum posts: 7
File comments: 2
Uploads: 0
|
Love Clique, however since patch it seems to be having problems with DUF, no matter who i click on in the party frames it only heals me. if i have someone targeted and i try to use clique on anyone else on the party, it will ONLY heal the targeted unit, very strange.
oh and i downloaded the latest version of DUF too |
|
youngbro |
View Public Profile |
Send a private message to youngbro |
Find More Posts by youngbro |
Add youngbro to Your Buddy List |
09-26-07, 04:26 AM | ||
|
__________________
"There's only one thing that I know how to do well and I've often been told that you only can do what you know how to do well, and that's be you-- be what you're like-- be like yourself. And so I'm having a wonderful time, but I'd rather be whistling in the dark..." |
|
|
Cladhaire |
View Public Profile |
Send a private message to Cladhaire |
Find More Posts by Cladhaire |
Add Cladhaire to Your Buddy List |
09-26-07, 04:34 AM | ||
A Murloc Raider
Forum posts: 7
File comments: 2
Uploads: 0
|
*Update* Managed to get clique working, thanks for the update
Last edited by youngbro : 09-26-07 at 05:20 AM.
|
|
|
youngbro |
View Public Profile |
Send a private message to youngbro |
Find More Posts by youngbro |
Add youngbro to Your Buddy List |
09-26-07, 06:58 AM | |
A Kobold Labourer
Forum posts: 0
File comments: 1
Uploads: 0
|
Disabl Frames dont work..
When I disable the Target frames, I cant right click it to wisper or eather Duell the target(on right click the menù dont show)... the frame it like dead. an y tips?
|
|
Fragshunter |
View Public Profile |
Send a private message to Fragshunter |
Find More Posts by Fragshunter |
Add Fragshunter to Your Buddy List |
09-26-07, 09:27 AM | |
A Kobold Labourer
Forum posts: 1
File comments: 34
Uploads: 0
|
Pet frame
Clad, I was playing my Druid Alt, hooray for healing, and was trying to buff both a hunter and pet in my party. I was able to buff the hunter using the party frame but not the pet.
I was wondering if I missed something in your notes? I was using r86 last night. No errors came up in my bugsack either... Thanks for the mod as usual. Have a good one. Edit: I see that a few post prior someone was having similar issues, sorry for repeating the same comment.
Last edited by Stavmar : 09-26-07 at 09:55 AM.
|
|
Stavmar |
View Public Profile |
Send a private message to Stavmar |
Find More Posts by Stavmar |
Add Stavmar to Your Buddy List |
09-26-07, 01:05 PM | |
A Defias Bandit
Forum posts: 3
File comments: 53
Uploads: 0
|
I have the de-EU client, and the US client. It works fine with r87 now, I can click-cast normally, but in the German client, I get the glowy gauntlet when I cast. So basically it's now doubleclick-casting. I haven't tested it in real healing situations, but am worried that the click-delay might prove fatal.
Would be awesome to see this fixed, thanks for the great work, Clad, and good luck with moving. |
|
astalavista |
View Public Profile |
Send a private message to astalavista |
Find More Posts by astalavista |
Add astalavista to Your Buddy List |
09-26-07, 01:42 PM | ||
|
__________________
"There's only one thing that I know how to do well and I've often been told that you only can do what you know how to do well, and that's be you-- be what you're like-- be like yourself. And so I'm having a wonderful time, but I'd rather be whistling in the dark..." |
|
|
Cladhaire |
View Public Profile |
Send a private message to Cladhaire |
Find More Posts by Cladhaire |
Add Cladhaire to Your Buddy List |
09-26-07, 03:02 PM | ||
A Defias Bandit
Forum posts: 3
File comments: 53
Uploads: 0
|
|
|
|
astalavista |
View Public Profile |
Send a private message to astalavista |
Find More Posts by astalavista |
Add astalavista to Your Buddy List |
09-26-07, 03:55 PM | ||
A Kobold Labourer
Forum posts: 0
File comments: 6
Uploads: 0
|
Xperl and Clique.
....help. |
|
|
Aeidian |
View Public Profile |
Send a private message to Aeidian |
Find More Posts by Aeidian |
Add Aeidian to Your Buddy List |
09-26-07, 06:08 PM | |
A Kobold Labourer
Forum posts: 0
File comments: 3
Uploads: 0
|
Clique-ing action buttons isnt working
Ive always set up clique to use some action buttons that are macros. After the recent patch they have stopped working. let me explain....
the macros are /stopcasting mouseover casts such as: /stopcasting /cast [target=mouseover, help] [] Greater Heal(Rank 2) if I put the macro on my action bar and execute the keystroke, the fuctionality works fine. But if i use clique to hit the action button, it will not cast, my cursor just glows indicating the spell is ready. anyone have any input? I dont like using the keyboard to heal. |
|
blurr123 |
View Public Profile |
Send a private message to blurr123 |
Find More Posts by blurr123 |
Add blurr123 to Your Buddy List |
09-26-07, 07:25 PM | ||
A Kobold Labourer
Forum posts: 1
File comments: 6
Uploads: 0
|
Re: Xperl and Clique.
|
|
|
Ughmahedhurtz |
View Public Profile |
Send a private message to Ughmahedhurtz |
Find More Posts by Ughmahedhurtz |
Add Ughmahedhurtz to Your Buddy List |