Go to Page... |
Compatibility: | Plunderstorm (10.2.6) Classic (1.15.0) WOTLK Patch (3.4.3) |
Updated: | 03-21-24 12:45 PM |
Created: | unknown |
Downloads: | 1,270,635 |
Favorites: | 3,570 |
MD5: |
Clique is a simple addon that enables powerful click-casting and hover-casting on your unit frames and in the 3D game world. You can bind virtually any mouse or keyboard combination to a spell or macro. In it's normal configuration this enables you to use the bindings over your unit frames in order to cast spells directly on that unit. This allows you to more quickly select both the spell to cast, and the target of the spell without requiring an extra click.
To begin with Clique, open your spellbook and click on the new tab that is shown there. You can also open the configuration GUI by running the /clique slash command. From this binding interface you can add, remove and alter any of your Clique bindings. You will be unable to make these changes when you are in combat due to limitations in the Blizzard API.
Binding a spell
Binding a spell is just a matter of finding the spell in your spellbook, putting your mouse over it, and performing the binding you would like to add. For example, if you'd like to set 'Regrowth' to activate on 'Shift-LeftButton', then you just find that spell in your spellbook and then Shift-LeftClick on it. You can also bind keyboard combinations, so you could do the same with Shift-R if you'd like.
Keep in mind when you are setting your bindings that they will override any bindings that are already set on the frame, for example the default bindings to 'Target unit' and 'Show unit menu'. You can override these bindings if you would like, but you should then set a new different combination that will activate the original functions
Binding the 'Target unit' or 'Show unit menu' actions
If you've rebound or lose these default bindings, you can re-bind them using the 'Bind other' button in the Clique configuration. Click on the button, and choose the correct action and you will be presented with a dialog box that allows you to set the binding for that action. Simply choose a new key combination, and you will be able to target units and open your menu again.
Binding a macro
Binding a macro can also be found on the 'Bind other' button. You'll be given a new window with instructions and suggestions about writing your macros, but other than that the process should seem very similar.
Managing click-sets
Each binding can belong to a number of binding-sets. These sets determine when the binding is active. The built-in binding-sets are as follows:
File Name |
Version |
Hits |
Size |
Author |
Date |
v90001-0.1.0-beta |
3,686 |
103kB |
Cladhaire |
08-16-20 12:47 PM |
|
v40000-1.2.7-7e91cea |
2,931 |
79kB |
Cladhaire |
10-16-10 10:31 AM |
|
2.0.0-abfbb36 |
2,410 |
43kB |
Cladhaire |
10-11-10 04:34 PM |
|
r129 |
2,800 |
67kB |
Cladhaire |
11-14-09 11:55 AM |
|
r125 |
2,474 |
67kB |
Cladhaire |
11-14-09 11:46 AM |
|
r127 |
2,383 |
67kB |
Cladhaire |
11-03-09 01:54 AM |
|
r121 |
2,701 |
67kB |
Cladhaire |
04-17-09 01:49 AM |
|
r108 |
3,590 |
58kB |
Cladhaire |
10-13-08 02:55 PM |
File Name |
Version |
Size |
Author |
Date |
v3.5.6-release |
234kB |
Cladhaire |
01-17-24 01:13 AM |
|
v3.5.5-release |
234kB |
Cladhaire |
11-09-23 03:25 PM |
|
v3.5.4-release |
234kB |
Cladhaire |
09-08-23 01:08 PM |
|
v3.5.3-release |
234kB |
Cladhaire |
08-30-23 04:05 AM |
|
v3.5.2-release |
235kB |
Cladhaire |
07-12-23 12:33 PM |
|
v3.5.1-release |
234kB |
Cladhaire |
05-03-23 09:47 AM |
|
v3.5.0-release |
234kB |
Cladhaire |
04-01-23 04:55 AM |
|
v3.4.15-release |
234kB |
Cladhaire |
03-22-23 12:35 PM |
|
v3.4.14-release |
234kB |
Cladhaire |
01-25-23 09:26 AM |
|
v3.4.13-release |
234kB |
Cladhaire |
01-21-23 02:39 AM |
|
v3.4.12-release |
234kB |
Cladhaire |
11-29-22 01:55 AM |
|
v3.4.11-release |
234kB |
Cladhaire |
11-28-22 06:32 AM |
|
v3.4.10-release |
234kB |
Cladhaire |
11-06-22 02:25 PM |
|
v3.4.7-release |
233kB |
Cladhaire |
11-02-22 02:28 AM |
|
v3.4.6-release |
233kB |
Cladhaire |
10-27-22 04:08 AM |
|
v3.4.5-release |
233kB |
Cladhaire |
10-26-22 07:55 AM |
|
v3.4.4-release |
232kB |
Cladhaire |
10-26-22 01:05 AM |
|
v3.4.2-release |
233kB |
Cladhaire |
10-25-22 01:18 PM |
|
v3.4.1-release |
232kB |
Cladhaire |
10-25-22 08:52 AM |
|
v3.4.0-release |
233kB |
Cladhaire |
10-25-22 08:47 AM |
|
v3.3.0 |
154kB |
Cladhaire |
09-02-22 06:36 AM |
|
v3.2.1 |
153kB |
Cladhaire |
08-31-22 11:13 AM |
|
v3.2.0 |
151kB |
Cladhaire |
08-21-22 08:26 AM |
|
v3.1.5 |
105kB |
Cladhaire |
08-17-22 11:13 AM |
|
v3.1.4 |
105kB |
Cladhaire |
06-02-22 11:53 AM |
|
v3.1.3 |
105kB |
Cladhaire |
02-22-22 04:40 PM |
|
v3.1.2 |
105kB |
Cladhaire |
11-04-21 01:13 PM |
|
v3.1.1 |
105kB |
Cladhaire |
06-30-21 06:15 AM |
|
v3.1.0 |
105kB |
Cladhaire |
06-01-21 04:05 AM |
|
v3.0.2 |
104kB |
Cladhaire |
05-30-21 02:03 AM |
|
v3.0.1 |
102kB |
Cladhaire |
05-15-21 01:46 AM |
|
v3.0.1 |
102kB |
Cladhaire |
05-15-21 01:43 AM |
|
v3.0.0 |
102kB |
Cladhaire |
05-15-21 01:39 AM |
|
v90005-2.0.2 |
102kB |
Cladhaire |
04-08-21 09:36 AM |
|
v90005-2.0.2-beta |
102kB |
Cladhaire |
04-08-21 09:30 AM |
|
v90005-1.0.1 |
112kB |
Cladhaire |
04-07-21 12:13 AM |
|
v90005-1.0.0 |
102kB |
Cladhaire |
04-07-21 12:03 AM |
|
v90005-1.0.0 |
103kB |
Cladhaire |
03-12-21 11:07 AM |
|
v90002-1.1.0 |
103kB |
Cladhaire |
02-21-21 05:33 AM |
Comment Options |
Cladhaire |
View Public Profile |
Send a private message to Cladhaire |
Find More Posts by Cladhaire |
Add Cladhaire to Your Buddy List |
bigboyinlove |
View Public Profile |
Send a private message to bigboyinlove |
Find More Posts by bigboyinlove |
Add bigboyinlove to Your Buddy List |
11-13-11, 11:51 PM | |
A Kobold Labourer
Forum posts: 0
File comments: 36
Uploads: 0
|
Clique Guidance Reference
Hi.
I've actually installed and uninstalled this addon many times over the past couple of years. It looks awesome, and seems to behave in a similar fashion as Vuhdo without the overhead Vuhdo has acquired over the years. After installing it, I go about setting bindings for the mouse buttons, but then I become frustrated when unintended actions occur (like trying to keep from turning in a quest by holding down the shift key and right-clicking, which is required by SickOfClickingDailies to disable some dailies from being accepted automatically.) After playing around with it for a few days, I usually give up and go back to Vuhdo. But then I see an update to Clique here on WOW Interface or Curse and reinstall it to try again. Please understand that I do not blame Clique for my frustration. I simply do not have a handle on how Clique prioritizes things, and so my bindings usually get me into trouble. I've read through a bunch of Comments here and worked through all of the tickets on Curseforge. Your answers to cerbul were very enlightening about the serious potential I'm missing out on (I took notes ), so I've decided I need to master this addon. (I didn't even realize you could directly insert macros without taking up WOW macro slots or bind to keys as well as mouse clicks.) However, other than your introduction here, I can't seem to find any in-depth instructions. Would it be possible for someone to point me toward a website that can explain some of the nuances to Clique, like of the eight binding-sets, is there a priority order to which take precedence? Or how do I determine if one binding-set will override another? (This is in reference to "default - This set is always active on registered unit frames, unless overridden by another binding-set.") I've spent some time experimenting with binding-sets: using the default setting for say shift-left click to cast Renew and then shift-right click to cast Power Word: Shield. They seemed to work ok, so I added a shift-left click to the enemy bind-set for Shadow Word:Pain and a shift-right click to the enemy bind-set for Devouring Plague. Sometimes it wouldn't work on the target unit frame, so I tried adding the hovercast bind-set to the enemy bind-set. Well long story short, I ended up with a mess trying to use different combinations of bind-sets with the same key modifier button clicks. So, agian, I've come to the conclusion that I'm missing how these options interact. I can't determine if they are "and'ing" or "or'ing" or if there is just a priority list. I have figured out how to exclude registered frames. Apparently, my playstyle doesn't work well with casting spells on the player unit frame, and I'm ok with that. I'm just wondering if I would be better off, disabling all available frames but the one I use for healing. No I did not mix this addon with Vuhdo, and while I do test it on Grid without any problems for healing, I don't solely rely on that to see if things are working correctly. In fact, most of my healing needs are pretty straight forward, and I've just thought about using Clique just for that, but there is so much power here for my dps toons that I'd really like to be able to tap into it. I never quite got the hang of the dps clicking that Vuhdo has either. I may be trying to make this process more complicated than it is. (Leave it to a woman to complicate stuff. ) It's like mouseover macros. I see the power of them and have experimented with a few, but they've cause me more problems than solutions generally, so I don't use them. It's not that they are bad but that I may be over-complicating them. I do know that if I can get a handle on the mouse-clicking, I can expand to macros and keybindings because the basic principles should hold. Thanks for your time and assistance.
Last edited by gizmogeek : 11-13-11 at 11:53 PM.
|
|
gizmogeek |
View Public Profile |
Send a private message to gizmogeek |
Find More Posts by gizmogeek |
Add gizmogeek to Your Buddy List |
11-14-11, 09:23 AM | |||||
|
Re: Clique Guidance Reference
Hovercast is the wrong thing to use here. As for disabling frames, many many people disable Clique on any frames other than the ones they specifically use for healing, so don't feel back about that =)
If instead you want to be able to click on units in the 3D world (the actual avatars or nameplates) then you'll want to use 'hovercast' to accomplish that. If you want to be able to run a binding regardless of what you are hovering over (say it is a macro to scream bloody murder), then you'd want to use the global bind set. I hope that helps to clarify some things!
__________________
"There's only one thing that I know how to do well and I've often been told that you only can do what you know how to do well, and that's be you-- be what you're like-- be like yourself. And so I'm having a wonderful time, but I'd rather be whistling in the dark..." |
||||
|
Cladhaire |
View Public Profile |
Send a private message to Cladhaire |
Find More Posts by Cladhaire |
Add Cladhaire to Your Buddy List |
11-15-11, 02:14 PM | |||
A Kobold Labourer
Forum posts: 0
File comments: 36
Uploads: 0
|
Re: Re: Clique Guidance Reference
Thank you so very much. Everything was quite helpful, and I now have 40+ spells working on all three priest specs. The directions page allowed me insight into how the binding-sets work with and override each other. With a bit of judicious use of OOC and global options, I've even managed to keep from blacklisting my player frame. Now I only have 9 more classes to go before I start working on the Hovercast and keybind/macros options.
I'm not sure how to best handle the hovercast. Would macros with harm and help be the way to go as I'm not sure how to combine friend/enemy bind-sets with hovercast? Again, thanks for the splendid help!
|
||
|
gizmogeek |
View Public Profile |
Send a private message to gizmogeek |
Find More Posts by gizmogeek |
Add gizmogeek to Your Buddy List |
11-15-11, 04:08 PM | |
|
Hovercast should actually work fine with friend/enemy casts, shouldn't need to do anything special.
__________________
"There's only one thing that I know how to do well and I've often been told that you only can do what you know how to do well, and that's be you-- be what you're like-- be like yourself. And so I'm having a wonderful time, but I'd rather be whistling in the dark..." |
|
Cladhaire |
View Public Profile |
Send a private message to Cladhaire |
Find More Posts by Cladhaire |
Add Cladhaire to Your Buddy List |
11-15-11, 10:19 PM | ||
A Kobold Labourer
Forum posts: 0
File comments: 36
Uploads: 0
|
I added Hovercast to my left-click (Renew-friend/Shadow Word:Pain-enemy), right-click (Power Word: Shield-friend, Devouring Plague-enemy), shift-left click (Greater Heal-friend/Smite-enemy), and shift-right click (Flash Heal-friend/Mind Blast-enemy) spells for both friend and enemy. These are the only spells bound to these key combinations. I moved the default ones to Atl-Left and Alt-Right. I tried casting Renew on my portrait and got the expected results and the same with all of the other heal spells when used on my portrait. When I tried clicking on my image in the 3D world, nothing happened with Renew or Power Word: Shield, but Greater Healing and Flash Heal worked fine. I went to the target dummies in SW and tried the enemy spells while hovering over a target dummy. The spells bound to the shift key worked as expected, but the ones on the left and right mouse buttons wouldn't cast. I thought maybe an addon was interfering with the 3D world, so I shut off everything except Clique, but the results were the same. To recap each of the four spells bound to Friend are also bound to Hovercast, and the four bound to Enemy are also bound to Hovercast. The spells without key modifiers work on a unit frame but not while hovering over a person or enemy. When I left-click on the target dummy, it becomes targeted. When I right click on it, my toon draws her weapon. I double checked the settings and only those 2 bindings per key combination are listed. Am I missing something? Or is it not possible to use the normal left and right clicks for Hovercast? Thanks again for taking the time to help me. |
|
|
gizmogeek |
View Public Profile |
Send a private message to gizmogeek |
Find More Posts by gizmogeek |
Add gizmogeek to Your Buddy List |
11-16-11, 03:48 AM | |
|
You should *never* rebind left-click and right-click in hovercast or global. Those are the default buttons that WoW uses to select characters and move the camera in two different ways. Having those disappear is most certainly a bad thing.
Personally, I *only* use hovercast bindings with the keyboard, it's what they're really designed for, but they also work with clicks. They just will not work with the default left-click (and shouldn't for right-click, although for some reason you said that worked). Hope that makes sense.
__________________
"There's only one thing that I know how to do well and I've often been told that you only can do what you know how to do well, and that's be you-- be what you're like-- be like yourself. And so I'm having a wonderful time, but I'd rather be whistling in the dark..." |
|
Cladhaire |
View Public Profile |
Send a private message to Cladhaire |
Find More Posts by Cladhaire |
Add Cladhaire to Your Buddy List |
11-16-11, 07:08 AM | ||
A Kobold Labourer
Forum posts: 0
File comments: 36
Uploads: 0
|
Thank you, thank you! Edit: I am assuming that the keybind component is just that: binding to a key not related to an actionbar slot. Is this correct, or can it also be put on an actionbar slot?
Last edited by gizmogeek : 11-16-11 at 12:45 PM.
|
|
|
gizmogeek |
View Public Profile |
Send a private message to gizmogeek |
Find More Posts by gizmogeek |
Add gizmogeek to Your Buddy List |
12-02-11, 04:05 PM | |
A Kobold Labourer
Forum posts: 0
File comments: 4
Uploads: 0
|
Problem with Clique...
When I Click on someone and they happen to die before the spell finishes casting, and when i click on another unit's frame to use the same or different spell it's stuck (i cant cast by clicking on another unit) until i cast a spell via keybinding to reset the tooltip. pls help. Huge problem when healing on raids. ty PS: if it helps im using Grid + Clique |
|
tristanova |
View Public Profile |
Send a private message to tristanova |
Find More Posts by tristanova |
Add tristanova to Your Buddy List |
12-02-11, 04:13 PM | ||
|
__________________
"There's only one thing that I know how to do well and I've often been told that you only can do what you know how to do well, and that's be you-- be what you're like-- be like yourself. And so I'm having a wonderful time, but I'd rather be whistling in the dark..." |
|
|
Cladhaire |
View Public Profile |
Send a private message to Cladhaire |
Find More Posts by Cladhaire |
Add Cladhaire to Your Buddy List |
12-02-11, 05:12 PM | |
A Kobold Labourer
Forum posts: 0
File comments: 4
Uploads: 0
|
sorry. Like for example I right click (Greater Heal) on a unit to start casting. But if that unit dies before casting finishes and i right click (Greater Heal) on a different unit, the tooltip is stuck. The only way to unstuck it is if i use a different spell, and sometimes that also doesnt work. So i am forced to manually hit the keys to cast a spell.
PS: It didnt start doing this until 4.3 went out.
Last edited by tristanova : 12-02-11 at 05:14 PM.
|
|
tristanova |
View Public Profile |
Send a private message to tristanova |
Find More Posts by tristanova |
Add tristanova to Your Buddy List |
12-02-11, 05:15 PM | |
|
What tooltip? Clique doesn't do a thing with tooltips, at all!
__________________
"There's only one thing that I know how to do well and I've often been told that you only can do what you know how to do well, and that's be you-- be what you're like-- be like yourself. And so I'm having a wonderful time, but I'd rather be whistling in the dark..." |
|
Cladhaire |
View Public Profile |
Send a private message to Cladhaire |
Find More Posts by Cladhaire |
Add Cladhaire to Your Buddy List |
12-02-11, 05:48 PM | |
A Kobold Labourer
Forum posts: 0
File comments: 4
Uploads: 0
|
I am wording it wrong. start over.
ok For example I right clicked (greater heal) on a dead player, clique gets stuck and wont let me click on anyone else. |
|
tristanova |
View Public Profile |
Send a private message to tristanova |
Find More Posts by tristanova |
Add tristanova to Your Buddy List |
12-02-11, 05:50 PM | |
|
This is the same behaviour that you would have if you had someone dead targeted and you used a hotkey (action bar) to cast the spell. The glowing hand would appear waiting for a target for the spell. Your next action/binding, or pressing escape should clear that. If the second binding isn't, then I'll look into that.
__________________
"There's only one thing that I know how to do well and I've often been told that you only can do what you know how to do well, and that's be you-- be what you're like-- be like yourself. And so I'm having a wonderful time, but I'd rather be whistling in the dark..." |
|
Cladhaire |
View Public Profile |
Send a private message to Cladhaire |
Find More Posts by Cladhaire |
Add Cladhaire to Your Buddy List |