(8Kb)

Updated: 11-23-20 12:47 PM

Addon for:
oUF.

Add Favorite

Install Help

Pictures

File Info

Compatibility:	Shadowlands pre-patch (9.0.1)
Updated:	11-23-20 12:47 PM
Created:	12-16-09 10:47 AM
Downloads:	109,643
Favorites:	281
MD5:

oUF: MovableFrames

Version: 1.18

by: haste, p3lim

Allows you to move frames/headers created by oUF.

Features
- Doesn't require authors to add support. It just works out of the box.
- Saves frame position on a per layout base.
- Frame position is saved based on closest anchoring point to retain position regardless of scale/resolution.
- Able to save position of frames that have no name.
- Remembers the initial position of frames.
- Let's you easily scale all frames.
- X and Y position and scale can be fine-tuned through the option UI.
- Type /omf to toggle anchors.
- Type /omf <whatever isn't space> to open the UI.

Known Issues and TODO
- Issues @GitHub

Changes from 1.17
- Don't try to make nameplates movable.

Changes from 1.16
- Comparability with 9.0.x

Changes from 1.15
- Handle headers that have no width defined.

Changes from 1.14
- No longer attempts to clear un-used initial positions before the first initial position table has been created.

Changes from 1.13
- Now correctly handles hidden group frames.
- Improved the unit guesswork so partypets, partytarget, maintank and mainassist group should be detected more often.

Changes from 1.12
- Ability to set scale on the frames by dragging an anchor located in the bottom right of the overlay.
- X position, Y position and scale can now be hand-tuned by clicking on the numbers in the option UI.
- Some minor clean-up.

Changes from 1.11
- Group frames will now show the backdrop, even when no frames are displayed.
- Bumped TOC interface version to 40100 (4.1).
- Update the subtitle as it was horribly outdated.
- Several small changes to allow embedding.

Changes from 1.10
- Added support for oUF 1.5.x, and the new header group formats.

Changes from 1.9
- Minor fix to work around events firing even though it's unregistered.

Changes from 1.8
- Should no longer attempt to move party/raid frames several times.
- Updated to work with both oUF 1.3.x and 1.4.x.

Changes from 1.7
- Move the frames back to their initial position when their entry is removed from the UI.

Changes from 1.6
- Yet another round of improvements on the frame name guessing. This will hopefully be the last.

Changes from 1.5
- Largely improved how frame names are guessed and added validation of the guessed names.

Changes from 1.4
- Correctly handle several levels of scaling.
- Also some minor code preparations for saving of default position.

Changes from 1.3
- Properly set the initial height of header frames that don't have any units yet.
- Don't wrap the unit label if the frame is too small to display it.
- Largely improved frame name guessing.

Changes from 1.2
- Made /omf <anything that isn't space> open the frame list interface.
- Child frames (such as party target) are no longer detached from their parents initially. Moving them will however do this.
- Attempt to describe the frames with more sane names. A quick example would be "oUF_PartyUnitButton1Target" that becomes party1target. This is also done in the interface list.

Changes from 1.1
- The frame list will no longer error out on empty data sets.

Changes from 1.0
- Party/raid frames that show the player and player's pet or target no longer gets confused with the real pet/target frame.
- Frames that don't have a legal position on the UI are temporary ignored. The downside with this is that they cannot be positioned until they have one.

Comment Options

Page 6 of 9

« First

Last »

03-19-10, 05:49 PM

haste

Featured Artist

Forum posts: 1027

File comments: 392

Uploads: 17

Originally posted by dorn
Sorry I did mean /omf ui. That was just a typo. My problem remains the same. The command is definitely working because it opens the interface tab and goes to the omf config. It's just empty when I open the ui. I will try posting a screen.

http://img222.imageshack.us/img222/6508/wowscrnshot031810135945.jpg

The config only contains moved frames, nothing else. Just type /omf and move a frame, then type /omf ui and watch how it's now listed there.

__________________
「貴方は１人じゃないよ」

03-18-10, 01:04 PM
dorn A Defias Bandit Forum posts: 2 File comments: 14 Uploads: 0	Sorry I did mean /omf ui. That was just a typo. My problem remains the same. The command is definitely working because it opens the interface tab and goes to the omf config. It's just empty when I open the ui. I will try posting a screen. http://img222.imageshack.us/img222/6508/wowscrnshot031810135945.jpg

03-18-10, 09:02 AM

haste

Featured Artist

Forum posts: 1027

File comments: 392

Uploads: 17

Re: UI won't show here either.

Originally posted by dorn
I'm also having a problem showing the UI. Specifically if I type /ouf ui it will open the options interface/addons tab and there will be a spot for oUF: Movable frames.

It says "Note that the initial frame" blah blah. The arrow keys are there as well but the spot that should show the list of the actual frames is empty. I've tried it with lily and classic just to test it but no dice.

I can't fathom what addon would be interfering with this though. Any ideas?

Originally Posted by Add-On Description

- Type /omf to toggle anchors.
- Type /omf <whatever isn't space> to open the UI.

__________________
「貴方は１人じゃないよ」

03-18-10, 02:24 AM
dorn A Defias Bandit Forum posts: 2 File comments: 14 Uploads: 0	UI won't show here either. I'm also having a problem showing the UI. Specifically if I type /ouf ui it will open the options interface/addons tab and there will be a spot for oUF: Movable frames. It says "Note that the initial frame" blah blah. The arrow keys are there as well but the spot that should show the list of the actual frames is empty. I've tried it with lily and classic just to test it but no dice. I can't fathom what addon would be interfering with this though. Any ideas?

01-23-10, 01:07 PM

haste

Featured Artist

Forum posts: 1027

File comments: 392

Uploads: 17

Originally posted by Galsif
I have one problem. I cant open the UI =S
I'm using TukUI dunno if that might be the problem

If something like /omf ui doesn't work, then your "out of luck". I don't mind spending time attempting to figure out why it works, but I'm not going to dig through some off-hosted shit compilation to do it.

__________________
「貴方は１人じゃないよ」

01-23-10, 11:41 AM
Galsif A Kobold Labourer Forum posts: 0 File comments: 4 Uploads: 0	I have one problem. I cant open the UI =S I'm using TukUI dunno if that might be the problem Last edited by Galsif : 01-23-10 at 11:50 AM.

01-21-10, 02:43 AM

haste

Featured Artist

Forum posts: 1027

File comments: 392

Uploads: 17

Originally posted by MMOGames
Any chance of getting profiles in next updates? I would be nice to have one profile for 40 man raid and 25 one

I don't have any plans to include profiles.

__________________
「貴方は１人じゃないよ」

01-20-10, 05:01 PM
MMOGames A Murloc Raider Forum posts: 8 File comments: 119 Uploads: 0	Any chance of getting profiles in next updates? I would be nice to have one profile for 40 man raid and 25 one

12-31-09, 09:04 AM

Freebaser

A Molten Kobold Bandit

Forum posts: 135

File comments: 307

Uploads: 10

Originally posted by haste
It should work as expected for you now. At least it passed all my local unit tests.

Works great. Thanks!

12-30-09, 10:26 PM
haste Featured Artist Forum posts: 1027 File comments: 392 Uploads: 17	It should work as expected for you now. At least it passed all my local unit tests. __________________ 「貴方は１人じゃないよ」

12-30-09, 06:33 PM

haste

Featured Artist

Forum posts: 1027

File comments: 392

Uploads: 17

Originally posted by Freebaser

Code:

oUF:RegisterStyle('Freebgrid', func) ... local raid = oUF:Spawn('header', 'Raid_Freebgrid') ... local tank = oUF:Spawn('header', 'MT_Freebgrid') ...

oUF_MovableFrames labels them all as "freebgrid".

Yay for doing reverse labeling

. I'll add a workaround for it soonish.

__________________
「貴方は１人じゃないよ」

12-30-09, 06:31 PM

Freebaser

A Molten Kobold Bandit

Forum posts: 135

File comments: 307

Uploads: 10

Originally posted by haste
No, what are the name you spawn them with tho'?

Code:

oUF:RegisterStyle('Freebgrid', func)
...

local raid = oUF:Spawn('header', 'Raid_Freebgrid')
...

local tank = oUF:Spawn('header', 'MT_Freebgrid')
...

oUF_MovableFrames labels them all as "freebgrid".

12-30-09, 06:25 PM

haste

Featured Artist

Forum posts: 1027

File comments: 392

Uploads: 17

Originally posted by Freebaser
Is there a way to override the name given to headers. I spawn 3 different headers in one layout(Raid/party, pets, MTs) and they all have the same name in the option's menu.

No, what are the name you spawn them with tho'?

__________________
「貴方は１人じゃないよ」

12-30-09, 06:16 PM
Freebaser A Molten Kobold Bandit Forum posts: 135 File comments: 307 Uploads: 10	Is there a way to override the name given to headers. I spawn 3 different headers in one layout(Raid/party, pets, MTs) and they all have the same name in the option's menu.

12-29-09, 12:50 PM

drgreen

A Kobold Labourer

Forum posts: 0

File comments: 3

Uploads: 0

Re: Re: Re: Re: castingbar

Originally posted by haste
"The newest" is never the correct answer :P. You have no idea how many times I've seen people say it, even while they are using up to four version behind the current. Anyway, I'll trust you on it.

There's a couple things you have to note tho', oUF_MovableFrames only makes frames movable. Moving of individual elements is something I consider far outside the scope of this add-on. Elements such as castbars is considered a part of the frame, and are not meant to be detached/moved away from it.

Another thing is that the maintank frames are not linked with the raid frames.

A third thing is that anchors are currently not restored to their defaults when you delete the unit entry.

Now the fun part \/. I fetched oUF_ALZA to try this myself, and I can move the frame around just fine (except the castbars for obvious reasons stated above).

Here's a breakdown of the testing:
1.4 and 1.5 - I'm able to move all frames around without any issues.
1.3 - Missing unit labels on several frames, header frames such as party, raidN and maintank are unmovable until a party or raid is entered and maintank is set.
1.1 and 1.2 - All frames are movable, but frame to frame anchoring is not adhered.
1.0 - Errors out.

Please do this instead of providing me with an image of your add-ons:
1. Disable everything except: oUF, oUF_ALZA and oUF_MovableFrames.
2. Check if the issue(s) still remain.
3a. If it still remains give me the version of oUF, oUF_ALZA and oUF_MovableFrames as listed in the TOC file.
3b. If it doesn't remain; Have fun enabling/disabling bulks of add-ons until you can reproduce it. There isn't really much I can do by "looking" at your list of add-ons. Nor do I really want to spend time fetching every single version of everything on that list just to reproduce it.

Why you don't see a overlay on the player/target/targettarget frame is really the only question I'm left with for now. Could you give 1.4 a shot and see if the frames still don't have a overlay? It's possible that there were some regression on that between 1.4 and 1.5.

I have now noticed that I could move both player, target + maintanks. I see the green overlay now. Dont know why :S, havent done any changes after i wrote the forum comment. But the problem is now solved except the castingbars..

I really want to move the castingbar, because I dont put so much focus on looking on the castbar. Thats why I NEED IT to be in the middle

thx for answering all my question btw.

Page 6 of 9

« First

Last »

Report this File

Category Jump:

Support AddOn Development!

You have just downloaded by the author . If you like this AddOn why not consider supporting the author? This author has set up a donation account. Donations ensure that authors can continue to develop useful tools for everyone.

[Disable these notices]