-Shortly after patch 3.3 launches I will be dropping a new release. So far mostly minor tweaks.
Planned Changes:
Pitbull 4
- Party frames are now moved and centered along the top of the screen instead of the top left corner. This corrects an issue of tool tips overlapping the party frames.
Bartender 4
- For some reason bar 1 was enabled and off the screen unable to be selected. The bar has now been centered on the screen and disabled.
SBF (Satrina Buff Frames)
- I have renamed each frame for the job it does. For example instead of SBF 1, it reads "Your Buffs" ect.
- The "Debuffs on Target" frame now shows when Demo Shout or Vindication or Curse of Weakness, Thunderclap, and Sunder Armor are applied by anyone. Previously it only showed when you applied them and did not include Vindication/Curse of Weakness. This is to help reduce the chance you are wasting time applying a debuff already present.
DBM
I have enabled the 2nd set of bars "big" bar to appear just above the target and target of target frame. This is to have a centered and larger CD bar to inform you of information you need to know during an encounter.
Need Help?
-If after reading ALL the information below you still are having issues downloading, installing or setting up my UI for a different resolution check out my guide: A Guide to Downloading User Interfaces
3.2.3 Version Changes:
-This UI will now be released and updated for 1920x1080 resolution only. Many apologies to my smaller resolution users. I will keep the version 3.2.2 (1280x1024) archived on this download page. You can continue to use that version by simply updating the addons as updates become available.
-Removed Archeron (found that I did not use it enough to keep it)
-Removed Archud2 (wanted to go to unit frames instead of the 3D target box)
-Removed X-perl (not enough customization)
-Removed Quartz (the need for this addon was replaced by Pitbull4)
-Added Icehud
-Added Pitbull4
-Added Recount
-This UI now has Focus and Target of your Focus.
-The information on this page has been updated and includes new instructions for the latest version.
The following information is Important. Read it! I will do my best to check the tankspot thread linked at the bottom of this page as often as I can to provide support help. You can also check that thread and the comments on this download page to see if someone asked the same question as you and an answer was provided. Please take the time to check the sources available to you, including addon homepages, if you are having an issue with one.
Install Instructions:
1) Copy your Interface and WTF folders and store them somewhere safe, outside your WoW folder(this is to create a backup, if you do not like my UI ).
2) Delete the Interface and WTF folder from your WoW Folder.
3) Download the UI and extract it to your WoW Folder.
4) Go into your WoW folder and open the Boda UI folder. Then pull out the WTF and Interface folders and place them in the WoW folder. Once you have the WTF and Inteface folders out you can delete the empty Boda UI folder.
5) Go into the WTF Folder and rename the appropriate folders with YOUR info.
- Account Name (All Caps)
- Realm/Server Name (First Letter Cap)
- Change "Your Name" to your characters name (First Letter Cap)
6) Profiles: Log in and use the following slash commands to open the configs and select the "Bodasafa - Eldre'Thalas" profile for each:
/bt
/omen config
/icehud config
/pitbull
/buttonfacade
/rb win
/mbf
/recount config *You have to access it through the wow options. Hit "ESC" and select "Interface" then select the "Addons" tab, then select "Recount" and you will see it there.
/statuswindow
/sbf options
/chinchilla
/chatter
/sct menu
/kgpanels config
7) After you have enabled those addons with my profile, reload your UI.
8) Log out of wow to save the changes.
9) Log in and Enjoy.
Other Classes and Resolutions FAQ:
The resolution for this UI is 1920x1080, But you can use this UI for other resolutions. All you have to do is play with the UI scale via the in-game video options till it looks right. You may have to do some other adjustments such as unlocking the panels and addons to relocate and re-size them slightly. If your having trouble moving them go check out the download page for that addon. They generally have helpful tips listed there.
Please note I CANNOT tell anyone how to set this UI up for a different resolution. It is impossible for me to describe how to make this fit to your screen.
Additionally this UI can work with many other classes and specs. Please read the information for SBF located here: Satrina Buff Frames 3 and refer to those instructions if you are using this UI for other classes. This will help you set up the Target Debuffs (left of the center box) and your special ability procs (right of the center box) if you are not a warrior.
Suggested Macros:
- Recount Reset
In order to get the recount window to look clean I had to remove all the little icons. Due to this I would recommend making a reset macro for recount. Otherwise you will stack up a crap load of saved data and load up your memory.
/recount reset
- Focus
I found it helpful to create a simple focus macro. Target the person/mob you want to focus and click the macro.
/focus
- Target Self
I do not use a player portrait in this UI since Icehud shows my Health/Rage ect. I recommend that you key bind "target self" via the in-game key bind options to a key. When you press that key you will see "you" as the target in your target frame. You then right click your name to see the normal options you would get via a regular player portrait.
Addon List (All addons can be found on either Wowinterface.com or Curse.com):
!Bug Grabber - Error Mod.
Atlas Loot - In game loot search.
Bartender 4 - Action Bars.
Baud Mark - Raid Symbols.
Deadly Boss Mods - Raid Boss Timers.
Button Facade - Action Bar Skins.
Button Facade Darion - The specific skin.
Chatter - Chat Mod.
Chinchilla - Mini-Map Mod
Cooldown Count - Countdown timers on action bar icons.
Grizzly Shared Media - Textures.
Icehud - Heads up display.
KG Panels - Back round art.
Mini-map Button Frame - Holds buttons in a frame to keep your mini-map clean.
Omen - Threat Meter.
oRA2 - Raid Management.
Outfitter - Gear Management.
Pitbull4 - Unit/Raid Frames
Rating Buster - Converts stats on items into percentages.
Recount - Damage Meter.
Status Window - Time/ MS/ FPS/ Durability.
Satrina Buff Frames(SBF) - Buffs/Debufs.
SCT - Scrolling Combat Text.
SCTD - Scrolling Combat Text Damage.
Shared Media Lib 3.0 - Shared Textures.
Tiptac - Tooltips.
If you have any questions/comments/suggestions please reply here:
While your there check out all the great tanking information tankspot.com has to offer.
Special Thanks Goes Out To:
Wowinterface.com for hosting my UI.
Tankspot.com for hosting my discussion thread.
The addon authors that created the mods used in this UI.
The users who have made this UI popular. I never imagined I would get this many downloads. I appreciate all the kind words I have received here and in my tankspot.com thread. It's your positive comments that keep me maintaining my UI for public download.
Thank you all and Enjoy!
~ Boda
Archived Versions - Boda's Black Box UI (1920x1080)
Originally posted by Johnniebad Love this UI. While tweaking it I screwed up your SBF profile. Is there a way to get it back without redoing entire ui. Tried reloading it and everything. Doesn't go back to your setup.
Read the instructions in my guide, linked near the top of my download page under "Need Help?". The information your looking for is located in the "Different Resolutions" section.
Love this UI. While tweaking it I screwed up your SBF profile. Is there a way to get it back without redoing entire ui. Tried reloading it and everything. Doesn't go back to your setup.
Originally posted by Ben258 Thanks my problem was I was trying to use the email from the convergence as my account name when it was actually my old one.
Edit: forgot to reload ui fixed my other problem, but now my recount and omen won't show is this a problem with the ui or the actual addons.
They wont show unless your in combat in a raid/party. You can change those setting in the config options for either addon.
Originally posted by Ben258 Hey Boda I love your UI but I am having some troubles.
Your profiles will not load in game, is there anything causing this?
Thank you.
If the profiles are not loading you have the WTF folder in the wrong spot or you did not change the folder names with YOUR info and have them spelled correctly.
Check out my guide linked near the top of my download page for more instructions.
Originally posted by Dex The UI looks amazing, hands down one of the best I've seen. It's clean and clutter free. I moved the Party Frames into where the Raid Frames are located. It allows more screen view while in a party and also helps pull the whole thing together.
A little bit of work and I've been able to get it working/looking good with each character class. It is highly playable, as well. A lot of the clean UIs seem very unplayable, as if they are just to show off in screenshots or something. Great work! I just hope everything works well with the upcoming release of 3.3. =P
The UI looks amazing, hands down one of the best I've seen. It's clean and clutter free. I moved the Party Frames into where the Raid Frames are located. It allows more screen view while in a party and also helps pull the whole thing together.
A little bit of work and I've been able to get it working/looking good with each character class. It is highly playable, as well. A lot of the clean UIs seem very unplayable, as if they are just to show off in screenshots or something. Great work! I just hope everything works well with the upcoming release of 3.3. =P
Originally posted by aastarius
I often used to get issues with the Blizzard quest tracking including the message about needing to stop traking before I could add others. Turns out that for some of my toons Blizz was setting the default position of the frame "off the screen" and for others the "height" was a negative value!
The fix was to traverse the WTF directory down to the affected character and amend the layout-local.txt, specifically the section for "WatchFrame", e.g.:
Thanks alot aastarius! I opened the file and searched for "watchframe" and had a look at it, and the code is just what he linked in his post so its very easy to modify. The only thing I think you need to change is "H: 511". In my file the value was set to a negative number just like it was for him. After I changed the value to 511 it works just like it should!. I also changed Anchor from "bottomright" to "right" just to be safe.
Originally posted by aastarius I often used to get issues with the Blizzard quest tracking including the message about needing to stop traking before I could add others. Turns out that for some of my toons Blizz was setting the default position of the frame "off the screen" and for others the "height" was a negative value!
The fix was to traverse the WTF directory down to the affected character and amend the layout-local.txt, specifically the section for "WatchFrame", e.g.:
In my case the H: had been set to -142, replacing it with 511 made it alll ok again.
No idea what caused it for me and like I said, was only affecting certain characters .... weird eh.
So in order to fix it you need to edit the code in the file? Seems like they could have given us an easier option.
I appreciate your response, but I am not comfortable changing blizzard code and risk breaking something over a trivial frame I don't even use. Ill wait for an in-game fix. After all I made the thing go away in game, there should be a way to bring it back in game.
Originally posted by Gamba Yes I have read and it does not work.
I have to set everything from scratch if I want it to 1680x1024.
Setting to scratch would mean you download all the addons in my compilation and configure the color, borders, backrounds, information displayed, and fonts.
None of which you have to do in order to get my UI to work for your resolution.
There is no short cut to it, you will have to unlock and re-size the addons to make them fit your screen. But the good news is that's rather easy. You just have to be willing to spend the time.
I often used to get issues with the Blizzard quest tracking including the message about needing to stop traking before I could add others. Turns out that for some of my toons Blizz was setting the default position of the frame "off the screen" and for others the "height" was a negative value!
The fix was to traverse the WTF directory down to the affected character and amend the layout-local.txt, specifically the section for "WatchFrame", e.g.:
