Results: 44Comments by: lordkarthas
File: Raven01-31-14
Is there any chance we could be abl...
Posted By: lordkarthas
Is there any chance we could be able to make auto buff and debuff bars for raid1-raid40? I'm frustrated with the limitations of the buff and debuff filters in my unit frames (ShadowedUF), so I wanted to make Raven bars for these, but it doesn't look like raid players are an option.
File: GTFO03-14-13
The friendly fire sound for the Sto...
Posted By: lordkarthas
The friendly fire sound for the Stormcloud debuff from Throne of Thunder trash (spellid: 139900) should only trigger if it hits players other than yourself.
File: MikScrollingBattleText03-06-13
Since 5.2, MSBT is now showing all...
Posted By: lordkarthas
Since 5.2, MSBT is now showing all of my dispels as Purify Spirit (the spell I cast), rather than the aura that was dispelled.
File: Raven11-27-12
After patch 5.1, it's no longer pos...
Posted By: lordkarthas
After patch 5.1, it's no longer possible to right-click to unsummon a totem, even out of combat. Raven has been blocked from an action only available to the Blizzard UI. You can disable this addon and reload the UI.
File: GTFO12-17-11
Murozond's Tail Sweep plays a sound...
Posted By: lordkarthas
Murozond's Tail Sweep plays a sound every time the DoT ticks, rather than just when it is first applied.
File: Broker CallToArms06-27-11
Originally posted by Devius After...
Posted By: lordkarthas
Originally posted by Devius After extensive testing I found out that this addon causes frequent disconnects upon zoning into instances while in a party. I'm using it with DockingStation display and it causes the disconnect even when only the two addons are enabled. Haven't tested it with any other display. I can't seem to rep...
File: Broker CallToArms04-29-11
Re: Improvement?
Posted By: lordkarthas
Originally posted by Amemir Would it be possible to add in some options to limit which icons are shown on the LDB feed? I'll be working on that next. I just wanted to get this released as soon as possible.
File: LayCallToArmsAlert04-29-11
I don't think it's going to work qu...
Posted By: lordkarthas
I don't think it's going to work quite as you intended. You need to call RequestLFDPlayerLockInfo() to update the Call To Arms information from the server (otherwise it only updates when you open the Dungeon Finder). When you get the results back from the server, the event LFG_UPDATE_RANDOM_INFO is thrown. Also, there can be more...
File: CursorCastbar01-21-11
Is there a way to have CursorCastba...
Posted By: lordkarthas
Is there a way to have CursorCastbar enabled only in my healing spec?
File: Archy - Archaeology Assistant12-30-10
In the new version 1.7beta4, whenev...
Posted By: lordkarthas
In the new version 1.7beta4, whenever I switch continents, I get the message "Archy: TomTom doesn't exist... disabling it". Sometimes it appears twice. Obviously, I don't have TomTom installed.
File: Archy - Archaeology Assistant12-14-10
Archy lists the Uldaman Entrance Di...
Posted By: lordkarthas
Archy lists the Uldaman Entrance Digsite as being in Loch Modan, when it's really in Badlands.
File: OneClickEnchantScroll12-14-10
Originally posted by SaraFdS Well...
Posted By: lordkarthas
Originally posted by SaraFdS Well, obviously, that's not supposed to happen, and never happened to me. Did you get any error message, or did it just fail silently? Did the button say "Scroll" instead of "Embroider"? Anyway, uploading a new Version to fix another problem I encountered, it might solve your issue too, please give i...
File: OneClickEnchantScroll12-14-10
Sadly, it breaks when I try to embr...
Posted By: lordkarthas
Sadly, it breaks when I try to embroider my pants, since it's apparently trying to embroider a scroll.
File: MikScrollingBattleText12-12-10
I can't figure out how to make a tr...
Posted By: lordkarthas
I can't figure out how to make a trigger for when I reach 9 stacks of Lightning Shield (for the elemental shaman talent Fulmination). If I use Aura Application, the trigger does not work since Lightning Shield is not newly applied, and if I use Aura Refresh, there is no option to specify an amount of stacks/charges.
File: Archy - Archaeology Assistant12-10-10
Originally posted by daihenka A n...
Posted By: lordkarthas
Originally posted by daihenka A new release will be out sometime today with Dridzt's patch and a few new features such as: - Toggling (showing/hiding) the on-screen artifact and digsite lists without hiding TomTom - Filtering the artifact on-screen list to only the races available on the continent - Play a sound when you can s...
File: Archy - Archaeology Assistant12-09-10
Originally posted by Dridzt I'm h...
Posted By: lordkarthas
Originally posted by Dridzt I'm half-asleep from leveling so I'll post another patch if that's ok :p The problem I'm relatively sure comes mainly from force loading Blizzard_ArchaeologyUI. This is what the ## Dependencies: line does in the *.toc. Unfortunately Blizzard LoD addons are notoriously bad at handling early load...
File: Archy - Archaeology Assistant12-08-10
Originally posted by Dridzt I was...
Posted By: lordkarthas
Originally posted by Dridzt I was always solving from Archy so I didn't notice this issue. If it is present (and cause is what I'm suspecting) it will only be happening on a cold login. From the account info screen or when first starting WoW. Not after a reloadui or from logging out to the character selection screen. That...
File: Archy - Archaeology Assistant12-08-10
Originally posted by daihenka Whi...
Posted By: lordkarthas
Originally posted by daihenka Which region of the game client are you using? enUS, enGB or another language? enUS Are there any lua errors popping up for Archy? No, there were no errors displayed. Could you provide a screenshot of what is displayed? It seems to be working now (I can't replicate the problem at this time)....
File: Archy - Archaeology Assistant12-08-10
Originally posted by daihenka Can...
Posted By: lordkarthas
Originally posted by daihenka Can you try removing (or renaming) the Archy.lua file in your WTF\Account\ACCOUNTNAME\SavedVariables\ folder without WoW open, then start WoW and see if you get the same problem? Still broken, with the new version and the saved variables deleted. Also, you might want to move this out of the Cataclysm...
File: Archy - Archaeology Assistant12-08-10
Archy (with Dridzt's patch) breaks...
Posted By: lordkarthas
Archy (with Dridzt's patch) breaks the Archaeology frame for me; the races are not shown on the Current Artifacts tab, so there appears to be no way to solve an artifact with Archy enabled.
File: Cork04-26-10
Sometimes with Arcane Intellect, th...
Posted By: lordkarthas
Sometimes with Arcane Intellect, the same person shows up twice in the list. This can cause Cork to incorrectly choose the group buff over the single-target buff. Also, the tooltip still shows people who are dead or not in the same zone, and there's no option to hide them.
File: MikScrollingBattleText04-14-10
Is it possible to have heals you ca...
Posted By: lordkarthas
Is it possible to have heals you cast on yourself appear in both the Incoming and Outgoing scroll areas? EDIT: I'm only referring to direct heal spells and perhaps HoTs, not passive healing like Siphon Life or Vampiric Embrace.
File: TwentyFiveSeven04-08-10
Originally posted by Spontyman I'...
Posted By: lordkarthas
Originally posted by Spontyman I'll try to implement that as soon as possible, but sadly I won't be able to test it at the moment. EDIT: I won't be implementing this unless someone can help me / find an event that will only be triggered when someone joins the raid group. :( It looks like either RAID_ROSTER_UPDATE or PARTY_ME...
File: Clique02-21-10
Is it possible to configure Clique...
Posted By: lordkarthas
Is it possible to configure Clique to use different binding sets for different frames? For instance, I want my party/raid frames to have decurses and buffs, and my Grid frames to have heals.
File: Tidy Plates: Simple Theme02-09-10
Originally posted by danltiger I'...
Posted By: lordkarthas
Originally posted by danltiger I'm not sure if the skull will be in exactly the right place, so you may have to tweak the x/y/width/height values to your liking. If anyone else wants to do this, I find the following values work better: config.dangerskull = { width = 14, height = 14, x = -6, y = 0, anchor = "RIGHT", }