Using the /way command
Hi, both TomTom and Carbonite uses the /way command.
I've disabled TomTom. After setting up a series of points on the map, I notice Carbonite shows all the points with dotted lines. That's cool. Some questions: 1. If I set up points A, B and C, then subsequently I want to skip going to A, and just go straight to B, is there a way to remove point A? 2. How do I reset and remove all 3 points? 3. Is there a way to use another command name e.g. /carb goto... so that it does not conflict with TomTom? |
1, In your keybinds menu there is a "skip waypoint" option.. You have to set the keybind yourself.
2, Right click map and select "clear waypoints". 3, Why? Are you trying to have 2 different waypoints drawn on the map at the same time? Carb handles /way just fine, do you really need tom tom too? /boggle |
Thanks, I found out how to clear/reset shortly after my post.
Great tip about key bindings. So I don't need TomTom now. |
All times are GMT -6. The time now is 09:08 AM. |
vBulletin © 2024, Jelsoft Enterprises Ltd
© 2004 - 2022 MMOUI