PickupAction and Dominos?
The macro and script I use is in two parts.
Macro1 which is set to slot one of my stealth bar contains the following: Code:
/script local localizedClass, englishClass = UnitClass("target"); if (te==0 and (fn(sn)==0 or not fn(sn))) then PickupAction(14); PickupAction(15); end Code:
/script PickupAction(15); PickupAction(14); I have tried starting with PickupAction(3); PickupAction(2); (and vice versa for the corresponding macro), and gone up all the way past 100 in increments of 12 in case this was happenening because Dominos uses a different numbering convention. I have tried removing both mentions of '/swapactionbar 1 2' and changing '/click ActionButton3' to /click MultiBarLeftButton3 with and without Macro2 moved to first the second AND then third slot of every bar and then again going up through the numbers - none of this worked. I have been at this hours upon hours now, and it feels like I am so close to discovering whatever small piece of syntax I have to adjust to make it work with Dominos, but I just haven't been able to find it. Can any of you work it out? |
Works now, thanks.
|
All times are GMT -6. The time now is 01:17 AM. |
vBulletin © 2024, Jelsoft Enterprises Ltd
© 2004 - 2022 MMOUI