MayronUI Gen3
 

EDIT: Do not post here! Either leave a question in the comments section on the UI's Official Download page on WoWInterface here: http://www.wowinterface.com/download...ronUIGen4.html or send me a private message!

I no longer check this thread!

Hi everyone, I thought I would update this post to show the new changes I have been working on in a new YouTube video for MayronUI Gen3!

The video also shows my UI in general use so let me know what you think!

http://youtu.be/kHeD1CFC_SM

It is also now available for Downloading!

The nameplates don't really match... maybe you could square off the corners and tone down the bright white border?

Thanks for the advice but I just use Tidy Plates so its not my own addon. Its not very customizable but has some very good features to it which is why I use it.

Have you tried any of the other skins for Tidy Plates?

Yes a few and I liked the one I am using the best. Never really thought it looked ugly :/

My favourite looking name plates addon is Aloft but I like the features that Tidy Plates use too much which is a real shame.

Aloft has approximately 54,645,121,354,687,465,417,980 features, and every one of them is customizable to the nth degree. I find it hard to believe there's any nameplate effect you can't replicate with it. :p

Have you tried making your own skin for Tidy Plates? You seem to be pretty good at customization. You could probablly make something that fits a bit better for you pretty easily.

Thank you all for the advice however I do not know where I would begin with this. The feature I like with Aloft is to be able to place icons of Dots over the name plates like Tidy Plates does. I had no idea you could add more features to Aloft as I have had a look at the plugins you can additionally load with the addon but couldn't find that one.

I know some very basic lua scripts but that is all. To make an entirely new skin for Tidy Plates seems very advanced for me which is unfortunate as it definitely sounds interesting but right now it seems far too hard for me to be able to do.

What you could do is just make the skin artwork match your UI on the layout you are already using. That way it works how you like and matches.

Aloft might be the answer though, if you want to take the time to set it up exactly how you want. I know its great at customization since there are so many options with it.

However you go about it, keep going. Your UI looks great and I love using it on my alt. I don't remember last time I used something aside from my own setup. I just couldn't resist trying your setup out.

Just been trying out Tidy Plates again with the Threat Plates plugin installed as mine only had Nero which is not very customisable. I have made this:



Does that look better or worse? I would have personally liked if I could change the actual health bars width and height but Threat Plates does not have that option.

Ohhh those match way better.

Just updated my UI and added the Threat Plates in. I have also created a much better Setup addon for it that I think really supports the style of the UI much better:



Really happy with the final result. So much better :D

hi.. i need more action bars so i added Bar 5 from Bartender. But i found that when i put in the skill in Bar 1, the same skill appear in bar 5 too.

May i know how to adjust that?

THanks

Yes this can be fixed, it depends upon what your class is because on a Monk the "Stance of the Wise Serpent" will be assigned to bar 5 for example. So depending on what stance is assigned to what bar, you need to change this. Go into "/bar" options and click on Bar 1 in the Bars list. Go onto the tab called State Configuration and you will see that Bar 5 is being used in one of the States. Either disable it or change it to another bar.

ya.. im a monk and im on dps/heals spec... so whats the bar for WW?

during i set the bar 5 im on serpent stance... ill give it a try.. anything ill come back to u again...

thx for the guides...

I was inspired by your UI having the chatframes on top and decided to come up with an addon: http://www.wowinterface.com/download...mePrepend.html :rolleyes:

Hi.. i had ask bout this question 2 times at the addon comment area but i dont get any reply... Maybe someone had ask bout it..

Where can i find the Role check n ready check button for your UI?

Would appreaciate that if i can get a reply thx.. coz i had been looking for this for few days d..

Thanks

Hi,

Really nice UI as far as i can see.
I only had one question. When i follow the install guide. Backup my old WTF and interface folders.
extract the zip file and change the account name in the WTF folder. But when i start my WoW and want to login it comes with a battle.net error #107.

If i copy back my backup it login with no errors.

Does someone know how i can fix this?

Thanks in advance.


EDIT:

Found the solution. Had to do with the config.wtf the standard one with the UI had no Locale defined.
After copy all the lines from the original one it worked.

I've just updated this thread to show the new changes coming in my new update (MayronUI Gen2 - v3.0)

Here is the video demonstrating my UI in general and showing the new changes. Hope you guys like it!:

http://youtu.be/kHeD1CFC_SM
This video is not available for download yet but will be soon!

Cant wait for it, looks great so far!

Thank you! I have just uploaded it now and it is available for download :)

Installed it Yesterday but after choosing the right res it gives me error and everything is messed up :-(

Based on what you said in your other thread about the same issue (please don't post the same thing in multiple threads, BTW) your problem is that you are playing on a private server running vanilla WoW. Addons and UIs available on this and other reputable addon sites are designed for the current real version of WoW only. As this is an official Blizzard fan site, Blizzard's rules apply here. Private servers are a violation of the WoW EULA/ToS. Nobody here will help you with anything related to private servers, and if you continue posting about them, you will get banned.

If you are not playing on a private server, and just worded your post really poorly, you should be aware that nobody can magically see your screen over the internet and travel back in time to see the error(s) you got. You need to actually post the error(s) you are seeing if you want anyone to be able to help you with them.

@U2Alberto
The police has spoken, now get out! :)

Ok my english is not so good (i don't pretend u talk to me in italian ...) but ... 1st also in the other thread i think it's clear i don't play in private server 2nd the error is not the same (i knows the usual rules in forum) 3th ty for your help ....
i'll try to post a pic of what happened
@ Zork
thank God i don't have problem with police

If it is to do with a Bazooka addon Lua error then I fixed that problem in update 3.0.2 so you may want to download it again. You just need to replace your Interface/AddOns/MayronUI folder for the newer one.

Ty very much Mayron, i'll try late this afternoon, maybe first 1 try to get a pic of what happens, cos work i didn't play yesterday. Seems like after u choose the resolution, the setup stop and can't complete, so all visual addons are placed in the middle of the screen

now it's perfect, ty very much, great job

Finally figured the problem after so long and fixed it. I've uploaded the latest version 3.0.5 with this fixed: http://www.wowinterface.com/download...o.php?id=21221

It should now work correctly!

Layout for healers
 

Ok so it looks like there is 2 sets of raid frames? WHY? Also the spacing is not correct. I was wondering if you can take a look at it. I have uploaded a image so you can see what I am talking about. Thanks



As you can see group 5 is over the target.

This is because you have the Blizzard Raid Frames enabled to be shown while also using the Grid raid frames AddOn included in the UI Pack. You can choice which ones you want to use. If you want the Blizzard Raid frames then just disable Grid (or also uninstall it with all of its plugins). If you want to Hide the Blizzard riad frames then there is a side button on the left hand side of the screen, visible in the screen shot. Press that and blick the "Hide" button in the menu that pops up.

The reason the grid frames are blocking the target frame is because of an old bug with MayronUI Gen3 which is currently fixed in Gen4 (coming soon). All the unit frames in the screen shot are too high! To fix this go into "/suf"(shadowed unit frame settings) and go into the Unit Configuration list down to "Target of Target". All other unit frames are anchored to this so by altering this unit frame's Y offset you will also move all the others. Lower this frames Y Offset till everything looks correct. It will be in the "Frames" menu by clicking on the Frames tab at the top. Then I would also recommend pressing the Expand / Retract button to expand and retract it (or retract and expand it) so that the new position is saved in the MayronUI database.