Thread Tools Display Modes
12-31-10, 09:22 AM   #1
Marthisdil
An Onyxian Warder
AddOn Author - Click to view addons
Join Date: Jan 2005
Posts: 363
Keymappings: Using Steelseries Cata Mouse buttons - nUI doesn't save

Scott,
Messing around with the SteelSeries Cata Mouse...have it setup. Game detects and uses it fine. If I go to remap a hotkey to use a mouse button, the key binder sees me assign say, Mouse Button 9, I click OK, but nUI doesn't keep the mapping.

No label on the hotkey. If I go back to look at the mapping (ctrl-alt-right click), shows that there is no mapping.

Using some other buttons (Mouse Button 4, 5, scroll wheel) save appropriately.
__________________

Marth



 
12-31-10, 10:13 AM   #2
spiel2001
nUI's Author
 
spiel2001's Avatar
AddOn Author - Click to view addons
Join Date: Jun 2008
Posts: 7,724
Are you doing the mapping through nUI's key mapping interface (ctrl-alt-right-click on an action button) or using the Blizzard key binding interface (press Escape and select "Key Bindings")?
__________________

What people don't get is that I am, ultimately, an artist at heart.
My brush has two colors, 1 and 0, and my canvas is made of silicon.



Official nUI Web Site: http://www.nUIaddon.com
Official nUI Support Forum: http://forums.nUIaddon.com
My day job: http://www.presidio.com/
 
01-05-11, 12:43 PM   #3
Marthisdil
An Onyxian Warder
AddOn Author - Click to view addons
Join Date: Jan 2005
Posts: 363
Originally Posted by spiel2001 View Post
Are you doing the mapping through nUI's key mapping interface (ctrl-alt-right-click on an action button) or using the Blizzard key binding interface (press Escape and select "Key Bindings")?
Scott - I'm using the ctrl-alt-right click on an action button. Mappings through WoW's own keybindings seem to remember just fine.
__________________

Marth



 
01-05-11, 01:29 PM   #4
spiel2001
nUI's Author
 
spiel2001's Avatar
AddOn Author - Click to view addons
Join Date: Jun 2008
Posts: 7,724
Okay... so then you should be able to use the BLizzard Key Binding interface and scroll down the page to the nUI action bar section and set your key bindings in there. I'll figure out what's going on with nUI's custom key binding interface when I implement it in nUI6. Just make sure you're setting the key bindings on nUI's action bars and not blizzard's action bars when you use the Blizz Key Binding UI.
__________________

What people don't get is that I am, ultimately, an artist at heart.
My brush has two colors, 1 and 0, and my canvas is made of silicon.



Official nUI Web Site: http://www.nUIaddon.com
Official nUI Support Forum: http://forums.nUIaddon.com
My day job: http://www.presidio.com/
 
01-11-11, 12:24 PM   #5
Marthisdil
An Onyxian Warder
AddOn Author - Click to view addons
Join Date: Jan 2005
Posts: 363
Originally Posted by spiel2001 View Post
Okay... so then you should be able to use the BLizzard Key Binding interface and scroll down the page to the nUI action bar section and set your key bindings in there. I'll figure out what's going on with nUI's custom key binding interface when I implement it in nUI6. Just make sure you're setting the key bindings on nUI's action bars and not blizzard's action bars when you use the Blizz Key Binding UI.
Scott - will give it a try and respond back to you.

Thanks!
__________________

Marth



 
01-12-11, 06:47 PM   #6
Marthisdil
An Onyxian Warder
AddOn Author - Click to view addons
Join Date: Jan 2005
Posts: 363
Scott - confirmed last night that going through ESC > Keybindings and mapping the keys there DOES work as intended. nUI will label the keys correctly.

However, if I attempt to map the keys by doing ctrl-alt-right click it'll show the key mapped, but it doesn't keep it, nor display it.

Hope this helps.

BTW, goes up to Mouse Button 14 or 15 and has a scroll wheel as well. Seems that the ctrl-alt-right click works with buttons 1-6 and the scroll wheel, just none higher.
__________________

Marth



 
01-12-11, 10:37 PM   #7
spiel2001
nUI's Author
 
spiel2001's Avatar
AddOn Author - Click to view addons
Join Date: Jun 2008
Posts: 7,724
Okay -- many thanks for the input... I'll need you to do some testing for me with nUi6 when I get the key bindings code in there.
__________________

What people don't get is that I am, ultimately, an artist at heart.
My brush has two colors, 1 and 0, and my canvas is made of silicon.



Official nUI Web Site: http://www.nUIaddon.com
Official nUI Support Forum: http://forums.nUIaddon.com
My day job: http://www.presidio.com/
 
01-13-11, 06:22 AM   #8
Marthisdil
An Onyxian Warder
AddOn Author - Click to view addons
Join Date: Jan 2005
Posts: 363
Originally Posted by spiel2001 View Post
Okay -- many thanks for the input... I'll need you to do some testing for me with nUi6 when I get the key bindings code in there.
No problem at all!
__________________

Marth



 
 

WoWInterface » Featured Projects » nUI, MozzFullWorldMap and PartySpotter » Support » nUI: Bug Reports » Keymappings: Using Steelseries Cata Mouse buttons - nUI doesn't save

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off