Quantcast
Download
(103 Kb)
Download
Updated: 09-02-19 11:59 PM
Compatibility:
WoW Classic (1.13.2)
Rise of Azshara (8.2.0)
Updated:09-02-19 11:59 PM
Created:08-11-19 07:31 AM
Downloads:39,744
Favorites:97
MD5:

Clique [Classic]  Popular! (More than 5000 hits)

Version: v1.0.3-classic
by: Cladhaire [More]

Clique is a simple addon that enables powerful click-casting and hover-casting on your unit frames and in the 3D game world. You can bind virtually any mouse or keyboard combination to a spell or macro. In it's normal configuration this enables you to use the bindings over your unit frames in order to cast spells directly on that unit. This allows you to more quickly select both the spell to cast, and the target of the spell without requiring an extra click.

To begin with Clique, open your spellbook and click on the new tab that is shown there. You can also open the configuration GUI by running the /clique slash command. From this binding interface you can add, remove and alter any of your Clique bindings. You will be unable to make these changes when you are in combat due to limitations in the Blizzard API.

Binding a spell

Binding a spell is just a matter of finding the spell in your spellbook, putting your mouse over it, and performing the binding you would like to add. For example, if you'd like to set 'Regrowth' to activate on 'Shift-LeftButton', then you just find that spell in your spellbook and then Shift-LeftClick on it. You can also bind keyboard combinations, so you could do the same with Shift-R if you'd like.

Keep in mind when you are setting your bindings that they will override any bindings that are already set on the frame, for example the default bindings to 'Target unit' and 'Show unit menu'. You can override these bindings if you would like, but you should then set a new different combination that will activate the original functions

Binding the 'Target unit' or 'Show unit menu' actions

If you've rebound or lose these default bindings, you can re-bind them using the 'Bind other' button in the Clique configuration. Click on the button, and choose the correct action and you will be presented with a dialog box that allows you to set the binding for that action. Simply choose a new key combination, and you will be able to target units and open your menu again.

Binding a macro

Binding a macro can also be found on the 'Bind other' button. You'll be given a new window with instructions and suggestions about writing your macros, but other than that the process should seem very similar.

Managing click-sets

Each binding can belong to a number of binding-sets. These sets determine when the binding is active. The built-in binding-sets are as follows:

  • default - This set is always active on registered unit frames, unless overridden by another binding-set.
  • ooc - This set is only active when you are out of combat. Once you begin fighting, these bindings will no longer be active, regardless of what other bind-sets are selected.
  • friend - This set is only active when you are activating a binding on a friendly unit, i.e. one you can assist.
  • enemy - This set is only active when you are activating a binding on an enemy unit, i.e. one you can attack.
  • hovercast - These bindings will be available whenever you are over a unit frame, or a unit in the 3D world.
  • global - These bindings will be always available. They do not specify a target for the action, so if the action requires a target, you must specify it after performing the binding.
  • Talent: SpecName - When any talent bind set is selected, that binding will only be active when that talent specialization is active, regardless of other bind sets. A binding can be set for more than one talent spec at a time and it should function correctly.

Clique and dual talent specs
In addition Clique allows you to set up different profiles, and can automatically switch between them when your character changes talent groups. In order to set this up, click the 'Options' button, or navigate to the Clique options section of the Interface Options menu. Here you can create new profiles and change your options to activate different profiles depending on talent spec.

Bug reports:
If you are going to submit a bug report, please include the following information:
  1. What version of Clique you are using (/dump Clique.version)
  2. What unit frames you are using
  3. What specific bindings are not working

Some folks have asked for how they can donate money, and for many years I've enjoyed hearing about how my addons have helped other people enjoy World of Warcraft. If you would like to donate, I'd ask you to make a donation to the Colorectal Cancer Alliance, a worthy organisation that helped my sister immensely from her diagnosis through her final years. If you or a family member suspect you might have something not right in your butt, please have a doctor check it out. Colorectal cancer is one of the most preventable cancers in the world.

commit 553c5d58ee393eadd459caffdda114f92855f3ad
Author: Jim Whitehead <[email protected]>
Date: Tue Sep 3 07:56:15 2019 +0200

Update version for classic

commit 296b4074fc42df01e8a874f802a7a45b9917b748
Author: Jim Whitehead <[email protected]>
Date: Tue Sep 3 07:46:01 2019 +0200

Fix issue with talent spec bindings

commit 98e3d16d42ad45bfb8a529a06607219ca2a5a03c
Author: Jim Whitehead <[email protected]>
Date: Thu Aug 29 07:30:14 2019 +0200

Shuffle some talent code

commit 5ee054e086a3c4160fd288019ac338ac7561fc38
Author: Jim Whitehead <[email protected]>
Date: Mon Aug 26 21:39:39 2019 +0200

Fix issue with talent config

commit 9cda5a74ca527d40928e0425e2a6e6d9e57df0d6
Author: Jim Whitehead <[email protected]>
Date: Sun Aug 11 15:18:12 2019 +0200

Update compat check to use WOW_PROJECT_ID

commit 4d69032499932cb5e344a1c340c2441389eff2cc
Author: Jim Whitehead <[email protected]>
Date: Sun Aug 11 15:11:32 2019 +0200

Add support for spell ranks

commit f96f3c27ba40e7669ee4783ff479515dbd173b54
Author: Jim Whitehead <[email protected]>
Date: Wed Jul 24 16:41:39 2019 +0200

Attempt clean-up for Classic

commit 6b77821321290bd18ca9b9070d5e6d03d5fdb0eb
Author: Jim Whitehead <[email protected]>
Date: Tue Jul 23 21:47:14 2019 +0200

Fixing a duplicate event registration issue
Archived Files (2)
File Name
Version
Size
Author
Date
v11302-0.0.1-beta
103kB
Cladhaire
08-11-19 07:45 AM
v11302-0.0.1-beta
103kB
Cladhaire
08-11-19 07:31 AM


Post A Reply Comment Options
Unread 09-21-19, 09:29 PM  
Lycanthos
A Kobold Labourer

Forum posts: 0
File comments: 1
Uploads: 0
Hi Cladhaire, thanks for such a great addon. I've used it for a long time and was glad to see it was available for classic.
I am having a problem since the last update (version 1.0.3-classic). Now if i have a friendly target selected and i try to use a spell on my player frame (a spell like Rejuvenation), it will still cast on my target and not on me. In the Blizzard Frame Options I do have everything checked still (including player frame), so I'm not sure why it suddenly stopped working correctly.

I did some more testing and it appears to only be happening when I'm using macros like:
/cancelform
/cast Healing Touch(rank 5)

If I just try using healing touch out of the macro it seems to work fine.
Last edited by Lycanthos : 09-21-19 at 09:33 PM.
Report comment to moderator  
Reply With Quote
Unread 09-08-19, 03:59 PM  
theCrius
A Kobold Labourer

Forum posts: 0
File comments: 2
Uploads: 0
Hey, I realised that I was having issues because I was unzipping the new version on top of the old version. Deleting the clique folder and then unzip a the version brand new allowed me to see that the cast was taking into consideration also the rank.

For casting always the highest rank, there should be an option, by right clicking the binding if I remember, that say something "remove the rank" or "always cast max rank". It will get rid of the specification of the rank in the binding.


Originally Posted by Winniver
Also only casting max rank spells as Shaman.

Originally Posted by theCrius
Can you clarify how to bind an action (left click, right click, etc) to a specific spell rank?

As a druid, casting downranked spells is quite important or we go OOM in a matter of seconds.
What I did try was binding a specific rank but I noticed that no matter what, the spell casted is always the highest rank.
Report comment to moderator  
Reply With Quote
Unread 09-08-19, 08:55 AM  
Winniver
A Kobold Labourer

Forum posts: 0
File comments: 3
Uploads: 0
Also only casting max rank spells as Shaman.

Originally Posted by theCrius
Can you clarify how to bind an action (left click, right click, etc) to a specific spell rank?

As a druid, casting downranked spells is quite important or we go OOM in a matter of seconds.
What I did try was binding a specific rank but I noticed that no matter what, the spell casted is always the highest rank.
Report comment to moderator  
Reply With Quote
Unread 09-03-19, 05:24 PM  
Serenityrising
A Kobold Labourer

Forum posts: 0
File comments: 1
Uploads: 0
Love clique but issues!

Ok so I installed clique classic and love the hover casting feature - especially bc I have it installed with ElvUI and itís great with my party unit frame. Problem is now that itís installed, when I try to self cast I have to hover on myself / my image to cast too. I canít press alt + hotkey to self cast even though self cast is set in wowís key bindings. It no longer recognizes alt as self casting.

The other issue Iím having is now Iím forced to hover cast damage spells on enemies unit frame as well which is crazy annoying. Even If I have an enemy targeted I have to hover on their image / unit frame to cast a damage spell. Iím sure this is also true for healing - if I have a friendly targeted it prob wonít cast on them unless I hover but thatís less important to me than the damage spells.

Any suggestions on fixes for these two issues?
Report comment to moderator  
Reply With Quote
Unread 09-02-19, 05:26 AM  
theCrius
A Kobold Labourer

Forum posts: 0
File comments: 2
Uploads: 0
Can you clarify how to bind an action (left click, right click, etc) to a specific spell rank?

As a druid, casting downranked spells is quite important or we go OOM in a matter of seconds.
What I did try was binding a specific rank but I noticed that no matter what, the spell casted is always the highest rank.

Originally Posted by Cladhaire
I've fixed the bug with spell ranks so it works properly.

In addition, I added a right-click dialog option to remove the rank from a spell that you've already bound. If you do this, you should be able to then use that binding to cast the highest rank of the spell.

I'll do what I can to keep this updated!
Last edited by theCrius : 09-02-19 at 01:59 PM.
Report comment to moderator  
Reply With Quote
Unread 08-30-19, 09:45 PM  
waldra
A Kobold Labourer

Forum posts: 0
File comments: 3
Uploads: 0
Originally Posted by Cladhaire
Originally Posted by waldra
There is a bug/problem. With default Left button action, if you Left click a spell in the spellbook you get a secure API error in Clique.
Can you give me steps to reproduce this?
I thought I did.

Use the default Clique setting for left mouse button
Open Spellbook
Left Click on a Spell icon in the spell book window to cast it
get an error
Report comment to moderator  
Reply With Quote
Unread 08-28-19, 09:57 PM  
Muzurio
A Defias Bandit

Forum posts: 2
File comments: 1
Uploads: 0
I would really like to use this add on, but the explanation on how to bind a spell is just not clear to me.

I open my spell book (with the P button), but then when i click shift-left click, nothing happens. In settings there is also no "'Bind other' button" button. So I have no idea on how to get started with this add on.
Report comment to moderator  
Reply With Quote
Unread 08-28-19, 05:15 PM  
prophetik
A Kobold Labourer
 
prophetik's Avatar

Forum posts: 0
File comments: 30
Uploads: 0
Thank you for bringing this (back) to classic!
Report comment to moderator  
Reply With Quote
Unread 08-26-19, 01:47 PM  
Cladhaire
Salad!
 
Cladhaire's Avatar
Premium Member
AddOn Author - Click to view AddOns

Forum posts: 1935
File comments: 4758
Uploads: 19
Originally Posted by waldra
There is a bug/problem. With default Left button action, if you Left click a spell in the spellbook you get a secure API error in Clique.
Can you give me steps to reproduce this?
__________________
"There's only one thing that I know how to do well and I've often been told that you only can do what you know how to do well, and that's be you-- be what you're like-- be like yourself. And so I'm having a wonderful time, but I'd rather be whistling in the dark..."
Report comment to moderator  
Reply With Quote
Unread 08-12-19, 02:30 PM  
Xeldheir
A Murloc Raider

Forum posts: 4
File comments: 15
Uploads: 0
You are a LEGEND, a true, magnificent LEGEND.
Report comment to moderator  
Reply With Quote
Unread 08-12-19, 11:06 AM  
shakked
A Kobold Labourer

Forum posts: 0
File comments: 1
Uploads: 0
thanks alot!!!
Report comment to moderator  
Reply With Quote
Unread 08-11-19, 05:25 PM  
waldra
A Kobold Labourer

Forum posts: 0
File comments: 3
Uploads: 0
There is a bug/problem. With default Left button action, if you Left click a spell in the spellbook you get a secure API error in Clique.
Last edited by waldra : 08-11-19 at 05:26 PM.
Report comment to moderator  
Reply With Quote
Unread 08-11-19, 08:00 AM  
Cladhaire
Salad!
 
Cladhaire's Avatar
Premium Member
AddOn Author - Click to view AddOns

Forum posts: 1935
File comments: 4758
Uploads: 19
I've fixed the bug with spell ranks so it works properly.

In addition, I added a right-click dialog option to remove the rank from a spell that you've already bound. If you do this, you should be able to then use that binding to cast the highest rank of the spell.

I'll do what I can to keep this updated!
__________________
"There's only one thing that I know how to do well and I've often been told that you only can do what you know how to do well, and that's be you-- be what you're like-- be like yourself. And so I'm having a wonderful time, but I'd rather be whistling in the dark..."
Report comment to moderator  
Reply With Quote
Post A Reply



Category Jump: