Results: 330Comments by: Saiket |
File: Juggler06-24-10 |
![]() Posted By: Saiket
Originally posted by Baine
other keybind mod:
no
error:
no
closing+reopening:
didn't fix it :(
Edit:
disabled all addons but optionhouse and juggler, and it works
have to keep that in mind, but it works
thank you for juggler :banana:
Edit2:
found the reason why it didn't work
addons like SnowfallKeyPress and s...
|
File: Juggler06-23-10 |
![]() Posted By: Saiket
Originally posted by Baine
i've tried this, but it only used the torch, showing the target circle, but further spinning didn't make it finally throw the torch, had to do that by hand...
any way to really make it work just by scrolling or is that a mistake on my side?
I'm not sure how that could happen. Does the mod cause an...
|
File: NPCScan06-23-10 |
![]() Posted By: Saiket
Originally posted by nikapo
1x _NPCScan-3.3.5.1\_NPCScan.lua:449: Usage: GetAchievementCrieriaInfo(achievementID, criteriaIndex)
Once it gets approved, version 3.3.5.2 should fix this.
|
File: _VirtualPlates06-22-10 |
![]() Posted By: Saiket
Originally posted by Zergreth
As far as I understand, _VirtualPlates will break with the introduction of 3.3.5. Don't have the patch yet, since I'm playing EU, but the patch notes on wowwiki.com say:
You use those vars for _VP, don't you? :(
Don't worry, the new version will work almost exactly the same. :)
|
File: NPCScan06-21-10 |
![]() Posted By: Saiket
Originally posted by dimzen
Hi,
If I input a custom mob on one char, I have to input the same custum mob again.
Is there a way that all my char's get the same custom's?
-
Dimzen
There's no easy way to do that yet, but you can copy your per-character saved variables file from one character to your others out of game. You...
|
File: _VirtualPlates06-19-10 |
![]() Posted By: Saiket
Originally posted by danltiger
Heya Sai,
Some Mac users have been experiencing crashes when using Tidy Plates, after getting mind-controlled. This also seems to be happening with VirtualPlates...
http://forums.worldofwarcraft.com/thread.html?topicId=23425635742&pageNo=3#0
Just wondering what your thoughts were. Certainly...
|
File: _NPCScan.Overlay06-17-10 |
![]() Posted By: Saiket
Originally posted by Robicus
Actually, that's what I just did. I backed up the file _NPCScan.Overlay.PathData.lua (in the Interface/Addons/_NPCScan.Overlay folder), found the ID numbers of the NPCs I don't want to scan for, and removed those lines. Every time I find another one, I write down the ID number, and once in a while I clo...
|
File: oUF SpellRange06-17-10 |
![]() Posted By: Saiket
Originally posted by neverg
I'm trying to add support of SpellRange to my UnitFrames (oUF_Lumen) and somehow I'm not getting it. It should work fairly simple but it just doesn't.
I've added this:
-- oUF_SpellRange
if IsAddOnLoaded("oUF_SpellRange") then
if(unit) then
self.SpellRange = true
self.inRangeAlpha = 1...
|
File: _Corpse06-05-10 |
![]() Posted By: Saiket
Originally posted by David2702
____
Edit: The latest version, 3.3.0.2, should now work with FriendsWithBenefits. In addition, cross-realm players' corpses should work properly in PuG dungeons now.
I am guessing the addon is no longer working. :(
Are there any plans to change this?
It's still working for me, and I have...
|
File: _VirtualPlates05-28-10 |
![]() Posted By: Saiket
Originally posted by Dridzt
I wonder if there is a workaround that will allow this addon to keep working after 3.3.5.
At the moment the removal of access to camera cvars on ptr breaks LibCamera-1.0 and consequentially _VirtualPlates :(
Collateral damage from the effort to break AVRE I guess.
_VirtualPlates will still work...
|
File: NPCScan05-20-10 |
![]() Posted By: Saiket
Originally posted by eldavido
Hi Saiket
I was just about to post about an issue I'm having, when I noticed you replying to nosoup4crr.
I also seem to be having this issue, where clearing out the cache doesnt actually clear it out, but it seems to vary between toons, if that makes any sense ?
I can log one toon, and look at...
|
File: NPCScan05-06-10 |
![]() Posted By: Saiket
Originally posted by nosoup4crr
For some reason, my cache is no longer clearing. I'm not sure what the problem is. I've done it dozens of times. But, now, when I restart WoW after deleting my cache, all the mobs stay cached.
Make sure WoW is completely closed before you delete the cache, or else WoW will remake those files w...
|
File: NPCScan04-04-10 |
![]() Posted By: Saiket
Originally posted by Kaka09
How close in a zone do you have to be to the npc for the scan to pick them up?
The range is about 100 yards, but it's not exact. If you're flying through a zone really fast, the detection range might lag behind as WoW tries to keep up.
|
File: Tidy Plates: EPEEN04-02-10 |
![]() Posted By: Saiket
Originally posted by Tanque
Taurens should have bigger epeen bars. Gnomes should be smaller.
That's just a myth.
|
File: _VirtualPlates03-27-10 |
![]() Posted By: Saiket
Originally posted by Lombra
Hi,
what is that addon in the screenshot with Toshley? I know it says TidyPlates but I can't get it to look like that with the core addon.
Thanks
That used to be the default theme for TidyPlates, but it's evolved into the Grey theme since then.
|
File: _NPCScan.Overlay03-24-10 |
![]() Posted By: Saiket
Originally posted by kalemeow
Could this be integrated with AVR?
I'll try it out. :)
|
File: _NPCScan.Overlay03-24-10 |
![]() Posted By: Saiket
Originally posted by Sepioth
Got this error
: ...NPCScan.Overlay\Modules\_NPCScan.Overlay.Mapster.lua:29: hooksecurefunc(): SizeUp is not a function:
...NPCScan.Overlay\Modules\_NPCScan.Overlay.Mapster.lua:29: in function <...NPCScan.Overlay\Modules\_NPCScan.Overlay.Mapster.lua:27>:
|
File: oUF_HealComm403-23-10 |
![]() Posted By: Saiket
Any chance you'll make use of the new way StatusBar textures are setup to position the overhealing bar? In 3.3.3, the StatusBar's texture actually gets resized instead of just having its TexCoords manipulated, so you could anchor your overhealing bar to the right side of that and only need to adjust the width. It would fix the slig...
|
File: AVR03-23-10 |
![]() Posted By: Saiket
Originally posted by Olog
@Saiket
Sounds good, will have to see how that works. I have the normal cases covered. Problems mostly with vehicles, and moving platforms such as the gunships in Icecrown raid and possibly others I don't even know about
I'll see if the vehicle bugs are solvable in LibCamera, but transports currently a...
|
File: AVR03-23-10 |
![]() Posted By: Saiket
Would you be willing to use LibCamera-1.0 to pull in camera data? I've been keeping it up-to-date with fixes for as many anomalies as I can find, including cases like upside-down cameras. It also avoids overwriting custom camera views. Keeping the updating logic in a library should help performance when more than one mod is scrapi...
|
File: _NPCScan.Overlay03-20-10 |
![]() Posted By: Saiket
Originally posted by ChaosInc
Seconded. I much prefer SilverDragon and would love to see it supported by this. I'd assume the functionalities are similar and shouldn't take much, but I haven't opened up the codes to compare them.
I just finished a new version tonight that can work standalone or in concert with _NPCScan. I'll...
|
File: _NPCScan.Overlay03-17-10 |
![]() Posted By: Saiket
Originally posted by clam729
Hello again. Any plans to make a standalone version ? If so, I could dump RareSpawnOverlay and use yours. The tamable pets/clearing the cache is quite annoying for the main app, but your overlays are great looking.
UPDATE : Wasn't sure if you would enable/create a standalone option so I changed all t...
|
File: NPCScan03-13-10 |
![]() Posted By: Saiket
Originally posted by Caeniix25
I just installed the whole addon, I started up Wow and I can't even get the interface up. I type /npcscan and I get nothing. Idk what the problems is or why the interface doesn't seem to want to work for me. Please help.
If typing "/npcscan" responds with "Type '/help' for a listing of a few comma...
|
File: _NPCScan.Overlay03-13-10 |
![]() Posted By: Saiket
Originally posted by nToxik
How come NPC Scan Overlay doesn't work with Alphamap anymore? When I go into /npc_scan and check the overlay tab, the AlphaMap slider is checked but grayed out.
npcscan 3.3.0.2
npcscan overlay 3.3.04
alphamap AM3v3.3.002
Ah, I'm surprised nobody mentioned this sooner! Looks like the author of...
|
File: _VirtualPlates03-06-10 |
![]() Posted By: Saiket
Originally posted by dr_AllCOM3
My FPS drop by 10 from 120 while standing next to some dummies.
Have you tried not hooking the nameplate's onUpdate and instead updating them all every 0.1 seconds? I bet that would cut the cpu time in half.
The illusion of depth looks terrible when throttled. Imagine how text labels jump bet...
|