Go to Page... |
|
Thread Tools | Display Modes |
09-25-07, 11:01 PM | #1 |
Mazzle 1.1 Fresh/New Installation after patch 2.2
Fresh Mazzle 1.1 installation after the 2.2 patch. This is the process that I took to fix the mazzification process on a new installation. There are likely shorter routes that you could take on some of the steps, but I took them to try to ensure that there would not be any issues.
1.) Either download or find where you saved the Mazzle1.1.zip file for the 1.1 release and unpack it. Follow the second step of the original installation instructions. a) Go to your World of Warcraft directory (usually C:\Program Files\World of Warcraft)2.) Login to World of Warcraft and onto your character. Press the escape button to bring up the main menu and choose the Video settings button. Change the video resolution to the appropriate one for your display. Save that configuration and exit the game. 3.) Now follow step 3 from the original installation instructions. ----------------------------------Now open the file C:\Program Files\World of Warcraft\Interface\AddOns\MazzleUI\CustomLibs\ContextMenu.lua with wordpad. Press Ctrl-H to bring up the replace dialog. Enter the text "self:assert" into the find text input and the text "assert" into the replace text input. Save and close the file. Now open the file C:\Program Files\World of Warcraft\Interface\AddOns\Mazzifier\Mazzifier_Configs.lua with wordpad. Press Ctrl-F to open the Find dialog. Enter the text "EnableError" into the find text input and press Enter. You will see the line SetCVar("EnableErrorSpeech","0") add 2 dashes -- to the front of that line giving you -- SetCVar("EnableErrorSpeech","0"). Now save and close that file. Now we will use the Wow Ace Updater to update the mods to their current state. If you do not have WAU yet, you can download it from http://www.wowace.com/wiki/WowAceUpdater. Follow the instructions to install with Internet Explorer for the best/easiest results. Then run WowAceUpdater from your Start->All Programs->WowAce.com menu. Click on File and choose "Update all Installed AddOns", it will run for a moment while it downloads the newest packages. Once that is finished I select the following packages:
Then click on File and choose "Install/Update all Marked Addons With Externals". This will run for another moment and then stop. You can close WAU at this point. 4.) Now we will do step 4 of the original installation instructions. With the exception of item d since we did that before installing MazzleUI. You can do it again if you want, and you should be able to wait until this point to change the video settings. I chose to do it before to help to ensure that step was out of the way and wouldn't cause a problem getting MazzleUI setup. 5.) The following problems occured when I first performed the mazzification process:
The ContextMenu is still an issue, but this process should be able to get you a new start with MazzleUI. |
|
WoWInterface » AddOns, Compilations, Macros » AddOn Help/Support » Mazzle 1.1 Fresh/New Installation after patch 2.2 |
«
Previous Thread
|
Next Thread
»
|
Display Modes |
Switch to Linear Mode |
Switch to Hybrid Mode |
Threaded Mode |
|
|