MazzleUI in WoW 2.1 (observations so far)

Mazzlefizz · 05-23-07, 04:36 AM

Well, I just logged in for the first time an hour ago, and haven't noticed many significant issues at all. I haven't even updated any add-ons in the last few days.

The only things I've noticed:

Cartographer's transparency is not working in the same way it worked before. It seems to be decreasing the transparency of the whole map rather than just the parts you can't go to. Since the previous setting was 0%, your map will be invisible. Just hold down shift and mouse wheel up and you can make it visible again. (FIXED IN NEW VERSION OF CARTOGRAPHER)
Error with Sanity2. Seems to be the result of a simple API change. I'm guessing an update will fix this. (Actually Sanity might not be part of the old package) FIXED.
Error with moveFrames. Not sure on this yet. FIXED.
There are new 3d models in the patch. As a result, I'll need to add them to my model database and you'll get a warning message whenever you target one of those mobs. The one you guys probably all noticed is the combat pet named "Willy" or something. There are instructions later in this thread on how to turn of the warning sound/message.

Things I have tested that others seem to have issues with:

Autobar is working fine for me.
Raid frames are working fine. Hot-swapping the different locations is also working well.
SCT, SCTd works fine for me.

Things I have not tested but some people have reported:

I have not tried a character that shifts stances. Apparently, Autobar is preventing many bar add-ons from shifting correctly in combat.
I have not tried the Mazzifier.

I ran around and grabbed some add-on updates just now. I found about 100 of them but have not yet installed them. From the limited testing I've done so far, this does not seem to be problematic patch.

Romie · 05-23-07, 05:10 AM

when i first logged in i had a buggered UI running at 3 fps. i decided to try using wowace updater and that seamed to fix the problems i had. Mazzifier is worrking fine too.

Fhait · 05-23-07, 05:39 AM

Visually, the only thing I've noticed is that my consumables Autobar has vanished in place of a radio button in the dead center of the screen that I can right-click on to pull up the autobar settings screen. Also, I cannot click on the Mazzle Options in the top FuBar to open up the menu.

I ran Mazzifier on a new character and it worked fine. (albeit without the autobar)

BugSack however is constantly disabling/re-enabling itself after reporting more than 20 errors per second. So things are definately happening behind the scenes.

So all in all, Mazzle is functioning in 2.1, with no UI updates. Will try updating them all throughout the day and see how things run tonight.

Thanks again Mazzlefizz. Your UI is fantastic.

Phyraan · 05-26-07, 04:14 PM

Originally Posted by Fhait

Also, I cannot click on the Mazzle Options in the top FuBar to open up the menu.

I got this too, only it doesnt work for any character on any server. And because of this, i cant edit my action bars, so I cant display any new spells, which is causing concern.

The map thing worked when i used the shift+mousewheel thing, though it looked slightly different.

beamar · 05-27-07, 08:54 PM

Also having some of the probs listed above

-raid frames and party windows both showing up during raids. Have party windows unchecked.

-Targets not always showing up when attacking.

-A new one that i ran into today. The border around the map now seems to be sitting at the top right hand corner of the screen and not where it should be. Oddly enough, when I was in the raid, it seemed to be where it was suppose to be.

beamar · 05-27-07, 09:19 PM

ok, figured it out, it's a bongos option. Got that all fixed up.

brynchel · 05-28-07, 05:18 AM

Originally Posted by beamar

Also having some of the probs listed above

-raid frames and party windows both showing up during raids. Have party windows unchecked.

-Targets not always showing up when attacking.

-A new one that i ran into today. The border around the map now seems to be sitting at the top right hand corner of the screen and not where it should be. Oddly enough, when I was in the raid, it seemed to be where it was suppose to be.

I figured out how to fix the raid and party both showing. Cycle thru raid being on top. on bottom and hidden. Then after being hidden Put them back to where you want and the party will not be there.

flaska · 05-23-07, 05:41 AM

I cannot right-click on FuBar, and I can't see my raid frames. Maybe that has something to do with transparency too, since I have rang-check transparency on my raid frames and custom transparency on fubar?

However, my fubar is completely gone (only the little green dot left of it) but I haven't updated it since I downloaded the UI so it might just be that.

myoso · 05-23-07, 07:24 AM

I've noticed that the map doesnt open fully on the first buttonpress, I have to press M (for map, DOh!) twice, at the first press bugsac reports an error and an "invisible" map window appears, pressing M again brings up the map almost as it should be. pressing M again results in the visible map window disappearing but movement is locked due to the invisible window, so you need to open the map again and use the X to close it. 2'nd of all. fubar doesnt seem to function properly as you cannot bring up the menu that displays bongos options and such (can't remember what else was in there). And it seems like Blizzard has decided to remove the "add-on memory" setting for scripts. as i cant find it in the addons menu.

That was all the bugs i could find now. I'll try to update FuBar, Dewdrop and Cartographer to see if anything changes.

I love MazzleUI! Cheers for a good job Mazzle

Arkive · 05-23-07, 07:36 AM

This is what I've done so far, and everything I can think to test has seemed fine. It's a slight variation on what someone else posted in a different thread.

Backup your Addons folder
Install Ace updater (available at http://www.wowace.com/wiki/WinAceUpdater)
Open up the Ace Updater and choose "Edit", "Mark Installed Addons"
Choose "File", "Install/Update marked addons with externals"

That has worked beautifully for me so far, including Mazzify's on new characters, as well as SCT, Autobar, Cartographer, and a few other "trouble" mods reported. The only hiccup I've had is an error generated when I convert to a raid, though it appears to have no impact on the frames or it's function. The error is below if anyone is interested:

1.0\MazzleUI_UnitFrames.lua:343: attempt to index field 'GroupFilter' (a nil value)

Also, this may only apply to a small fraction of you, but if you use the RC/beta releases of Atlas/Atlasloot, be sure to uncheck those mods in the AceUpdater before updating so you don't get reverted back to an older release version.

celebros · 05-23-07, 08:22 AM

I'm pretty sure I've narrowed the page/bar swapping issues in-combat to autobar.

I use an addon I wrote to bind each shape to a key that can be spammed to switch between each shape called MOShapes, and it was suffering from an issue where in combat it wouldn't switch between the shapes correctly so I used this behaviour as an additional metric.

So I disabled all addons, except MOShapes, logged in and the blizzard bars started swapping correctly in and out of combat. Also MOShapes would shift shapes properly in and out of combat.

Then I enabled Bongos and it continued to swap correctly and MOShapes also continued to work. So I enabled everything and it stopped working again. So I systematically disabled each of the other addons until it started working again, once autobar was disabled all the bar swapping and shape shifting started to behave again.

levend · 05-25-07, 03:03 PM

im having trouble with the 3d models. if i enter into a fight before targetting something, i cant see the targetted enemy...

today i did some pvp and i saw that capping is giving some strange errors; [2007/05/26 00:54:12-396-x3]: Capping-2.0.3099\core.lua:581: attempt to index local 'button' (a nil value)
(tail call): ?:
<in C code>: in function `WorldStateScoreFrame_Update'
<string>:"*:OnShow":2: in function <[string "*:OnShow"]:1>
<in C code>: in function `Show'
Interface\FrameXML\UIParent.lua:1077: in function `SetUIPanel':
Interface\FrameXML\UIParent.lua:837: in function `ShowUIPanel':
Interface\FrameXML\WorldStateFrame.lua:678: in function `ToggleWorldStateScoreFrame':
<string>:"*:OnClick":9: in function <[string "*:OnClick"]:1>

and glorry lib also bugging too...

weaponzero · 05-26-07, 12:14 PM

On my warlock, soul shards keep moving themselves from my soul bag into my regular bags. At first it gave an error message when i tried to move them back into the soul bag, but now it doesnt. It just puts them back into the main bags.

On my rogue, post 2.1 the stealth bar which replaces the main bar when I stealth no longer returns to the main bar upon unstealthing. This problem so far has only happened in the arena, not when questing or doing PvE.

Autobar stopped working with patch 2.1, has simply turned itself into a green dot in the center of my screen that does nothing.